Sparkfun RF Link Transmitter - 315MHz

50610

This Product Has Been Discontinued, This Page Is For Reference Only.

3.95 USD
Qty
Price
1
$3.95 ea.

This is only the 315MHz transmitter. This will work with the RF Links at 315MHz at either baud rate. Only one 315MHz transmitter will work within the same location.


Description [Hide]

This is only the 315MHz transmitter. This will work with the RF Links at 315MHz at either baud rate. Only one 315MHz transmitter will work within the same location.

This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The transmitter operates from 2-12V. The higher the Voltage, the greater the range - see range test data in the documents section.

We have used these modules extensively and have been very impressed with their ease of use and direct interface to an MCU. The theory of operation is very simple. What the transmitter 'sees' on its data pin is what the receiver outputs on its data pin. If you can configure the UART module on a PIC, you have an instant wireless data connection. The typical range is 500ft for open area.
This is an ASK transmitter module with an output of up to 8mW depending on power supply voltage. The transmitter is based on SAW resonator and accepts digital inputs, can operate from 2 to 12 Volts-DC, and makes building RF enabled products very easy.

Features:

  • 315  MHz Transmitter Operation
  • 500 Ft. Range - Dependent on Transmitter Power Supply
  • 2400 or 4800bps transfer rate
  • Low cost
  • Extremely small and light weight

Supported Antennae: 30-35cm of wire

You Might Also Like [Hide]

50604

RF Link Receiver - 4800bps (315MHz)

These wireless receivers work with 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$4.95 USD

KARDW

Solarbotics Ardweeny

Looking to build the smallest, handiest, bread-board friendly Arduino-compatible? The Ardweeny fits on the back of the included ATmega328P, taking up no more valuable breadboard space than the microcontroller itself!

$9.95 USD

50602

RF Link Receiver - 4800bps (434MHz)

These wireless receivers work with 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$4.95 USD

50606

RF Link Transmitter - 434MHz

These wireless transmitters work with 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$3.95 USD

30308

2.4G wireless module NRF24L01+PA+LNA (PA-SMA)

This wireless transceiver module is an easy and suitable module if you want to setup your wireless communication system at a low cost.

$9.90 USD

52120

Wicked Receiver Shield Kit

Want to do some wireless communication for the Arduino, but on the cheap? The Wicked Devices 433MHz Receiver Shield will give your Arduino-compatible ears!

$11.00 USD

51762

3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD

51045

Pololu Wixel Shield for Arduino

This Arduino shield interfaces the Pololu Wixel wireless modules to your Arduino-compatible project, enabling simple wireless programming, debugging, and control using standard Arduino software.

$12.95 USD

14400

16T GT2 5mm bore Timing Pulley

16 Tooth 5mm Bore Pinion Pulleys for stepper motors, GT2

$5.95 USD

29074

Grove - Touch Sensor

It's a ready-to-use touch sensor switch compatible with the Grove system. Plug it in, tuck it in behind a non-metallic surface, and you are finished.

$4.20 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!