LilyPad LED Micro (5pcs)

5049x

3.95 USD
Qty
Price
1
$3.95 ea.
2+
$3.56 ea.
100+
$3.16 ea.

Blinky lights, in all shapes and sizes, are always a good thing to have. These micro LilyPad LEDs cover the tiny end of the size spectrum, and come in white, red, yellow, blue and green.


Description [Hide]

If you wanted to stick a needle through a single point of light to sew it onto cloth, this is for you. By removing the resistor and changing the orientation of the surface mount LED, the board becomes a lot smaller than the standard LilyPad LED. The solution works great with with sheer fabrics, where you want to avoid unnecessary weight and exposed board space.

Note: Because the board itself doesn't include a current-limiting resistor, it's possible to over-power them and possibly burn them up. The high resistance of conductive thread can help protect the Micros from high current, so long stitches can be used with most power sources to keep the power levels 'Micro-friendly'. If you aren't sure where to start with resistance and current, using these in conjunction with a LilyPad Simple or Main Board is a great place to start, because they both have built-in current limiting and can't burn up your Micros.

Note: These are sold in strips of five boards which can be snapped apart with pliers. Some, however, may come as loose pieces that are already snapped apart.

Documents:

You Might Also Like [Hide]

50460

LilyPad Arduino 328 Main Board

This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!

$21.95 USD

50468

LilyPad Button Board

Part of the LilyPad wearable electronics system, this board gives the user a discrete, non-sharp button interface

$1.50 USD

50490

ProtoSnap - LilyPad E-Sewing Kit

The ProtoSnap series is a new way to prototype your projects without a breadboard. This box of goodies comes with a bobbin of conductive thread, needles, a battery and a sewable slide switch, battery holder, push button, and LEDs to jump start you into E-textile circuits!

$24.95 USD

50480

LilyPad Power Supply

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible.

$14.95 USD

50654

LilyPad Temperature Sensor

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor.

$5.00 USD

19062

Adafruit Trinket-Powered Neopixel Goggle Kit

This kit is a bit goofy and geeky, but a whole lot of fun to wear - Glowy goggles!

$40.00 USD

60660

Superflex 3m 90 LED Strand with 3xAA Battery Box

Here's a simple battery-powered, portable and flexible LED string solution. 3 meter, ~3cm spacing, powered by 3AA cells. Ideal for quick "BLING" effect!

$10.95 USD

50489

LilyPad Arduino SimpleSnap with LiPoly cell

This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in battery, and button snap connectors!

$29.95 USD

50461

LilyPad Arduino Simple Board

This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in power supply socket, and an on/off switch.

$19.95 USD

DZ3.4

3.4V Zener Diode

This unit has a minimum voltage of 3.315 V and a maximum voltage of 3.465 V, a leakage current of 1 V and a test current of 76 mA.

$0.50 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!