LilyPad LED PCB Set


This Product Has Been Discontinued, This Page Is For Reference Only.

4.95 USD
$4.95 ea.
$4.46 ea.
$3.96 ea.

These boards allow you to use your own 5mm LED as a LilyPad LED.

Description [Hide]

If you've ever tried to 'spiral' the legs on an LED so that you can wrap conductive thread through the loop, you know why this board was created. When twisting, the legs on the LED can potentially break off. This board allows the user to solder in a through hole device and then connect easily to conductive thread, forming a much more robust and sturdy connection. These boards work great to link anything through-hole (such as resistors, transistors, wires, connectors, etc) from soldered to conductive thread.

Each board has the correct holes to solder a standard 5mm LED (not included). These are packaged in packs of 10 boards, without LEDs.

The LilyPad LED PCB is a design conceived by Felicia Williams of Boulder, Colorado.

Note: Because of the 0.1" spacing for the LED, these can also be used to connect sensors, switches, etc.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Includes 10 bare PCBs.

You Might Also Like [Hide]


LilyPad Tri-Color LED

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color.

$7.95 USD


GM Series Plastic Wheels

2-5/8" diameter wheels for the GM2/3/8/9 gear motor.

$3.25 USD


ProtoSnap - LilyPad E-Sewing Kit

The ProtoSnap series is a new way to prototype your projects without a breadboard. This box of goodies comes with a bobbin of conductive thread, needles, a battery and a sewable slide switch, battery holder, push button, and LEDs to jump start you into E-textile circuits!

$24.95 USD


LilyPad Bright White LED

A simple, very bright, 250mcd, white LED LilyPad. Light up the night! With your shirt (or anything else you sew it to!)

$3.95 USD


360 Yard Spool of Conductive Thread

It ain't wire - it's stainless steel THREAD, ideal for low power and signals routing.

$41.95 USD


LilyPad LED Micro - Green (5pcs)

Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board.

$3.95 USD


LilyPad Arduino SimpleSnap with LiPoly cell

This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in battery, and button snap connectors!

$29.95 USD


The "Starry Night" Dress Bundle

A complete kit for adding some bling to any wearable project.

$65.18 USD


LilyPad Arduino 328 Main Board

This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!

$21.95 USD


100k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!