LilyPad Tri-Color LED
50470
7.95
USD
Qty
Price
1
$7.95 ea.
10+
$7.16 ea.
100+
$6.36 ea.
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color.
Description [Hide]
LilyPad Arduino is about making technology wearable. This particular module offers you a Tri-Color LED on a sewable board
Pulse the red, green, and blue channels to create any colour! This is a nice and bright "common anode" LED design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel.
LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
Dimensions:
- 20mm outer diameter
- Thin 0.8mm PCB
Documentation [Hide]
- [Schematic]: LilyPad Tri-Color LED Schematic
You Might Also Like [Hide]
50460
LilyPad Arduino 328 Main Board
This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!
$21.95 USD
50654
LilyPad Temperature Sensor
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor.
$5.00 USD
50472
360 Yard Spool of Conductive Thread
It ain't wire - it's stainless steel THREAD, ideal for low power and signals routing.
$41.95 USD
50486
LilyPad Light Sensor
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.
$7.95 USD
50482
LilyPad LiPower
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible.
$14.95 USD
60170
Double Rainbow RGB LED strip controller for Ardweeny
It's a RGB controller. For RGB LED strip lights. Two separate strips, actually. For an Arduino. Well, the Ardweeny, actually. What else can we call it but the "Double Rainbow Controller"?
$15.00 USD
52102
Lux Spectralis
The Lux Spectralis is a deluxe RGB blinky that you can build, with over 30 flashing, blinking and glowing modes.
$9.95 USD
60160
Star Controller - 3 Watt RGB Star LED Controller Kit
The larger 3 watt RGB LEDs are very bright and colorful, but if you don't get the power just right - POOF! Now your RGB is R(nothin')B. The Star Controller tames this LED so you can power it up with 5 to 12V and use any regular 5V signal to control each channel.
$22.00 USD
52824
T-Bolt Accessory (pairs)
Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch!
$4.00 USD
UBB
Ultimate BrutusBot Bundle
This is truly the Ultimate BrutusBot! It will do robotic front flips through the snow and keep on going!
$119.00 USD