LilyPad Buzzer

50464

7.95 USD
Qty
Price
1
$7.95 ea.
2+
$7.16 ea.
100+
$6.36 ea.

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling.


Description [Hide]

The LilyPad system is about integrating technology into textiles. This particular module is a small buzzer used to create different noises based on the toggling of 2 I/O lines on the LilyPad main board. It's Loud enough to hear inside a pocket but not obtrusively loud.

Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Documentation [Hide]

You Might Also Like [Hide]

LilyPad Arduino 328 Main Board

50460

This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!

$21.95 USD


LilyPad Button Board

50468

Part of the LilyPad wearable electronics system, this board gives the user a discrete, non-sharp button interface

$1.50 USD


LilyPad Light Sensor

50486

This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.

$7.95 USD


LilyPad LiPower

50482

A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible.

$14.95 USD


LilyPad Tri-Color LED

50470

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color.

$7.95 USD


Magnetic Snap 18mm

50499

Magnets. How do they work? We're going to guess magic. This particular set of magnets are pretty darn strong, are able to rotate freely, and conduct electricity. That's a pretty darn good kind of magic, if you ask me.

$1.95 USD


Costume Goggles

19060

The goggles of awesomeness perfect for costuming needs.

$9.95 USD


LilyPad Arduino SimpleSnap with LiPoly cell

50489

This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in battery, and button snap connectors!

$29.95 USD


PowerBoard-3U, 100 x 160mm, 6-hole strip, Solder protoboard

20920

This solder protoboard is like a solderless breadboard, but has a huge set of power distribution rails running through it. It also accommodates a 96-pin VME backplane connector for slotting connectivity.

$10.78 USD


Caprolactone Thermoplastic

60115

Caprolactone Thermoplastic - tongue-twisting mouthful of chemicalness. But this stuff is cool! You have to heat it up to work with it. Paradoxically, it still very cool, believe me.

$3.00 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!