Po.Scope Mega1 Bundle

46200

This Product Has Been Discountinued, This Page Is For Reference Only.

$199.95 USD
Qty
Price
1
$199.95 ea.

This is a great multi-function device, being a USB connected Oscilloscope, logic analyzer, chart recorder and more.


Description [Hide]

This bundle includes:

  • 1 PoScope Basic2
  • 2 PoProbe60
  • 1 PoProbeL2
  • 1 USB cable

Using the Plug and Play USB technology, the PoScope Basic2 oscilloscope is easy to setup and use. The software is a fully featured oscilloscope, chart recorder, logic generator, logic analyzer, and spectrum analyzer with advanced triggering all in one easy to use package. Software in English, French, German, Italian and Spanish language.

PoScope Basic2 modes:

2-channels oscilloscope

  • Sample rate: 100 Hz - 200 kHz
  • Input voltage: -20 - +20 V
  • ADC capacity: 10 bits
  • Triggering: absolute, differential, external
  • Window functions: Hamming, Hanning, Blackman, Blackman-Harris

2-channels spectrum analyzer

  • Sample rate: 100 Hz - 200 kHz
  • Input voltage: -20 - +20 V
  • ADC capacity: 10 bits
  • Triggering: absolute, differential, external
  • Window functions: Hamming, Hanning, Blackman, Blackman-Harris

16-channels logic analyzer (ETA: March 2010; feature coming as free upgrade)

  • Sample rate: 1 KHz - 8 MHz
  • Input voltage: 0 - 5V
  • Triggering: edge, level, mask
  • Decoding: UART, SPI, I2C and 1-Wire

2-channels recorder (ETA: March 2010; feature coming as free upgrade)

  • Marker measurements
  • Option to add 99 markers with comments
  • Maximum, minimum and average voltage measurement for each channel
  • Waveform record within several tens of hours

5 channels square signal and PWM generator (in development; feature coming as free upgrade)

  • Frequency: 3,91 kHz – 1 MHz
  • Duty cycle: 1- 99% f=7,8125 kHz

8-channels pattern generator (in development; feature coming as free upgrade)

  • Sample rate: 1 KHz - 1 MHz
  • Memory depth: 1544 bit/channel
  • Output voltage: logic 0 = 0V, logic 1 = 3.3 V
  • Maximum input/output current: 10 mA

 

Documentation [Hide]

You Might Also Like [Hide]

PropScope - 2 Channel Oscilloscope

21425

The PropScope is a two-channel oscilloscope that is capable of reading 25 million samples per second with ten bits of resolution over one, two, ten, or twenty volt peak-to-peak waveforms.

$199.99 USD


BNC to MCX Converter

50854

Tired of using the normal probes that come with the DSO Quad? Want to go back to using the classic oscilloscope probes that you know and love, well the BNC to MCX converter now allows you to do that very thing!

$3.25 USD


Bus Pirate Cable

14012

Here is a 10-pin breakout cable for the Bus Pirate or use it for other things like a colorful collar for your pet or a 10-pin ISP header breakout, you know....whatever you want!

$4.95 USD


6mm Sintra

SIN6mm

This 8x12 inch, 6mm thick expanded PVC sheet has excellent robot-building characteristics.

$5.75 USD


Synapse RF300PD1 with SMA Connector

51774

A module that runs at OTA (Over-The-Air) speeds up to 150Kbps and has a maximum transmission range of 3 miles! Perfect for when you need a separate frequency band when already using 2.4GHz nodes in an application. Just apply power and you've connected a mesh network.

$38.60 USD


Servo - Medium

22170

A simple, low-cost, high quality servo for all your mechatronic needs.

$10.95 USD


Pololu Mini Plastic Gearmotor bracket Pair - Wide

51082

Affix our GM6 and GM7 motors to any project with these plastic motor brackets.

$3.25 USD


Ardweeny Triple Pack + FTDI

BATPF

Triple the flavour, Triple the Fun, that the guarantee of Solarbotics Triple mint......wait a second...this isn't a Gum commercial!!! But it is a announcement for our Ardweeny Triple Pack which gives you 3 Ardweenys and a FTDI adapter for a reduced price.

$39.98 USD


PCBGrip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack)

52828

Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip.

$13.25 USD


USB Host Shield

50842

Have all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. Use it to interface and control any USB slave device - thumbdrives, digital cameras, bluetooth dongles, game controllers, Android phones and more!

$24.95 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!