USB-C 1A LiPoly 1-Cell Charging Module
USD $2.25
Excellent for building a portable project with a single LiPoly rechargeable, and recharging it from USB-C!
DESCRIPTION
Most portable projects are now using LiPoly battery technology, but it requires a more finicky method of charging. This TP4056-based module makes it trivial to add a dedicated single-cell charger to your project, powered by any USB-C power source. Note, this USB chip is dumb, so it won't poll the USB supply for higher voltages/current capabilities.
Features:
- Single-cell charger for Lithium chemistry cells
- Preset for 1000mA, but is configurable down to 30mA by resistor change
- USB-C interface
- LED indicators
Specifications:
- NanJing Top Power ASIC TP4056A Standalone Li-Ion charger
- 4.5~5.5V VDC input
- 25x19mm (1x0.75")
Note: In default configuration, this charger will pull as much as 3.7W from a USB port, which are nominally rated 2.5W on a standard PC. Make sure you use a USB charger or powered USB hub.
Cells are becoming very tolerant of high-current charging, but for the best battery life, use the 1/3 rule of thumb. A 1000mAh cell is best treated by charging at approximately 300mA
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.0017 kg |
|---|---|
| Dimensions | 2 × 1.5 × 0.5 cm |
REVIEWS
Related products
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.