Synapse "Getting Started" Receiver Bundle

39293

56.50 USD
Qty
Price
1
$56.50 ea.

Wireless control of RGB lighting, my my how technology is progressing! Team a few of these bundles up with a single Synapse Transmitter bundle to have multiple high power LEDs controlled by a Wii Nunchuk!


Description [Hide]

This bundle was born out of the idea of creating wireless stage lighting control. Starting with some example code that Synapse Wireless was kind enough to release to us we where to control all the PWM channels from a RF200 radio via manipulation from a Wii Nunchuk controller. We then combined that system with the majority of parts from our Northern Lights bundle and were able to do on-the-fly manipulation not only of high-power LED brightness, but of color as well. Control the Northern Lights with simple movements of your thumb and finger. Maybe you are just looking for an epically long range wireless programmable RGB lighting, this bundle is a sure bet for that too.

You can attach a large number of these Receiver bundles to a single Transmitter bundle as it sends a multicast signal to them all. The corresponding Transmitter Bundle is avaiable here. We recommend using a battery under 6V with this bundle, like a single LiPo or a 3-cell AA pack. If you'd like to use a wired power supply to provide a higher voltage to the Star Controller we recommend finding a regulator to drop the voltage beneath 6V for the Synapse Breakout board.

Bundle Includes:

Documentation [Hide]

You Might Also Like [Hide]

39292

Synapse "Getting Started" Transmitter Bundle

Add a Wii Nunchuck and battery to this bundle and you'll have a simple Joystick and 2 button interface for all kinds of wireless applications. Team this bundle up with a few Synapse Receiver bundles to control multiple high power LEDs!

$49.99 USD

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

39255

Solarbotics Synapse Breakout Board Kit

Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.

$5.50 USD

51768

Synapse RF200PD1 with SMA Connector

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range and an SMA antenna connector for optimum performance.

$25.00 USD

51762

3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD

FPin12-2mm

Female 12-pin Header-2mm Spacing

Female Socket Strip - 12 per Strip, gold flash pin surfacing, 2mm spacing. These pins are perfect for interfacing to our Synapse RF engines!

$1.00 USD

MPin12-2mm

2mm Pin Strip Single Row Header - 12 per

Male Strip - 12 per Strip, gold flash on 2mm spacing

$1.00 USD

51769

RF220SU SNAP Engine, 2 Mbps 2.4 GHz

The SNAP Engine Model RF220SU is an IEEE 802.15.4, lowpower, highly reliable solution for embedded wireless control and monitoring networks.

$29.95 USD

K SV-UPG1

Solarbotics Sumovore Baseplate Upgrade

For owners of Sumovores purchased prior to May 2005, this kit solidifies your Sumovore with a powder-coated steel baseplate!

$6.95 USD

TBLK10-100

10 Position Terminal Block 0.1" (0.254mm) Spacing

It's a SMALL terminal block, designed to mount in standard 0.1" (0.254mm) spaced holes. Ideal for permanent yet serviceable connections to microcontrollers.

$3.20 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!