H48C - 3 Axis Accelerometer

35220

This Product Has Been Discontinued, This Page Is For Reference Only.

19.95 USD
Qty
Price
1
$19.95 ea.

Curious just how strong the gravitational forces are today? Check out this 3 Axis Accelerometer for your latest project.


Description [Hide]

The H48C Tri-Axis Accelerometer is an integrated module that can sense gravitational (g) force of ±3g on three axes (X, Y, and Z). The module contains an onboard regulator to provide 3.3-volt power to the H48C, analog signal conditioning, and an MCP3204 (four channel, 12-bit) analog-to-digital converter to read the H48C voltage outputs. All components are mounted on a 0.7 by 0.8 inch module. Acquiring measurements from the module is simplified through a synchronous serial interface that any microcontroller can handle.

Features :

  • Measure ±3 g on any axis
  • Uses MEMS (Micro Electro-Mechanical System) technology, with compensation for calibration-free use
  • Onboard regulator and high-resolution ADC for simple connection to any microcontroller host
  • Free-fall output indicates simultaneous 0g an all axes
  • Small, breadboard-friendly package: 0.7" x 0.8" (17.8 mm x 20.3 mm)
  • Wide operational range: -25° to 75° C

Documentation [Hide]

You Might Also Like [Hide]

31040

NunChucky Wii Nunchuck I2C Breakout Adapter

Use the NunChucky I2C Breakout Board Adapter to use your Wii Nunchuck controller in your own projects!

$3.00 USD

50660

IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL3

Need a tight and tidy way to measure 6-degrees of freedom? The SparkFun IMU Digital Combo Board, measures pitch, roll, yaw, and rate of acceleration on each axis in a very flat package!

$39.95 USD

50656

SparkFun Triple Axis Accelerometer - ADXL345

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16G.

$19.00 USD

50658

Triple Axis Accelerometer Breakout - ADXL335

The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption - only 320uA!

$15.00 USD

R750K

750k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

20944

SMTpads-Size1, 80x50mm, 100x100mil Pad SMT Protoboard

This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a duplicate pad arrangement on the backside.

$3.75 USD

40256

BittyBot Micro Line Sensor Kit

The Bittybot Micro Line sensor is a convenient way to build edge or line sensors, especially for MicroSumos!

$12.31 USD

39100

Robotics with the BoE-Bot Parts Kit

The Robotics with the BoE-Bot Parts Kit turns your Board of Education into a BoE-BOT Robot.

$89.99 USD

19020

Standalone 5-Pad Capacitive Touch Sensor Breakout

Traditional switches are large and... switchy. Make your own slick switch buttons by plugging in conductive leads to this board to make a 5-button controller that suits YOUR needs.

$7.50 USD

40350

30cm 4-Conductor long 0.1" Molex Cable

Pre-assembled 4-conductor, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!

$3.25 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!