I2CXL-Maxsonar-EZ3

35126

This Product Has Been Discontinued, This Page Is For Reference Only.

31.96 USD
Qty
Price
1
$31.96 ea.

Looking for a distance sensor that can be chained via an I2C communication bus? Solarbotics now offers a line of chainable I2C Maxbotix Ultrasonic Sensors.


Description [Hide]

The I2CXL-MaxSonar-EZ sensors now feature an I2C bus. This allows for easy I2C integration and multisensor operation using a single bus.The I2CXL‑MaxSonar‑EZ3 has high noise tolerance and a narrow beam with more sensitivity than the MB1242. The I2CXL-MaxSonar-EZ3 also offers increased sensitivity and a longer detection distance for small and medium sized targets.

The sensor is small in size, yet the high output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and real-time noise rejection algorithms results in virtually noise free distance readings for most users. This holds true even in the presence of many of the various acoustic or electrical noise sources. The I2CXL‑MaxSonar‑EZ sensor line is factory calibrated to match the sensor beam patterns and provides a long range detection zone.

Features:

  • Simple I2C interface, easy control of multiple sensors!
  • Control up to 127 sensors using two wires
  • Cost-effective solution where centimeter precision range-findings are needed
  • Virtually no sensor dead zone, objects closer than 20 cm will typically range as 20 cm
  • Great for people detection applications
  • Small, light weight module, designed for easy integration into your project or product
  • Narrow beam sensor
  • Firmware filtering for better noise tolerance and clutter rejection
  • Real-time automatic calibration (voltage, humidity, ambient noise)

Specifications:

  • Resolution of 1‑cm
  • 42kHz Ultrasonic sensor measures distance to objects
  • Up to 40Hz reading rate
  • Maximum range of 7650 mm (301 inches)
  • Operates from 3.0V-5.5V
  • Low 4.4mA average current requirement
  • Operational temperature from -40˚C to +70˚C (-40˚F to +160˚F)
  • 200,000+ hours mean time between failure
  • RoHS compliant

Product Documentation:

MB1232 Datasheet.........................I2CXL-MaxSonar-EZ3 Datasheet
Ultrasonic Sensor Selection Guide.....Ultrasonic Sensor Selection Guide
Reliability Demonstration.................MTBF Report
High Resolution Pictures..................High Resolution Pictures.zip

Documentation [Hide]

You Might Also Like [Hide]

35112

HRLV-MaxSonar-EZ0

Looking for a distance sensor that will get you precise readings in the 1mm range? Solarbotics now offers a line of highly precise Maxbotix Ultrasonic Sensors.

$34.95 USD

29062

Grove - Ultrasonic Ranger

Ultrasonic distance sensor, featuring the plug-in-and-use Grove system.

$16.10 USD

40305

Devantech SRF01 Ultrasonic Ranger

The SRF01 Ultrasonic Range Finder is the latest product from Devantech. It employs Devantech's 2nd generation Auto-Tune technology which allows ranging all the way down to zero on a single transducer sonar.

$29.00 USD

50510

FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD

R680k

680k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

R10k

10k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

R2.0M

2.0M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

14183

JST-PH-2.0 2-Pin Connector Plug w/ Wire

A dramatic tale of two wires. One red. One black. Joined by a single female JST connector. Of destiny.

$1.29 USD

50888

Crazyflie Nano Quadcopter - Spare battery (BC-BL-01-A)

Small robots need small power sources, and this little 3.7V, 170mAh LiPoly unit from Seeed Studio is one of the smallest batteries we carry.

$7.80 USD

50485

LilyPad Coin Cell Battery Holder

If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.

$4.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!