Adapter, 12VAC @ 1A

34030

This Product Has Been Discontinued, This Page Is For Reference Only.

8.95 USD
Qty
Price
1
$8.95 ea.
2+
$8.06 ea.

This is a general purpose power adapter that converts 120VAC@60 Hz (North American) to 12V AC@60Hz.


Description [Hide]

This is a general purpose power adapter that converts 120VAC@60 Hz (North American) to 12V AC@60Hz. This power supply is used with the EPIC Plus PIC Programmer or can be used to build your own power supply.

Accepts 2.1mm center pin. Outer cylinder is 5.5mm

NOTE: Output is 12 Volts AC

You Might Also Like [Hide]

Adapter, 9VDC @ 1A

34050

This Adapter, 9V @ 1A is a economical power transformer.

$5.45 USD


5V 200mA Step-Up Boost converter

50647

The NCP1402 is a 5V Step-up DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low ripple 5V output capable of sourcing up to 200 mA.

$5.95 USD


Compact Selectable Switching Power Supply 3-12VDC

19030

What a handy power adapter - 100~240VAC input, and it outputs up to 10 watts, with a selectable voltage from 3 to 12VDC. Complete with a variety of interface plugs!

$14.95 USD


Resistor Bundle Set 1: 100ohm, 470ohm, 1k, 2.2k

RB1

10 resistors each of 100ohm, 470ohm, 1k, and 2.2k

$2.20 USD


PICAXE-08 Proto Board Kit

28500

The PICAXE-08 Proto Board Kit is a small circuit board that allows your 18-pin PICAXE chip to control larger currents like motors or solenoids.

$4.95 USD


Arduino Mega 2560 R3

50452

The Arduino Mega 2560 is the open-source "big brother" to Duemilanove/Uno reference design, using the much more capable ATmega2560.

$58.95 USD


Adafruit Monochrome 128x32 I2C OLED graphic display

18996

These are tiny, sharp, and most impressive OLED monochrome displays! Just about 1" diagonal, made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip.

$17.50 USD


Synapse RF200PD1 with SMA Connector

51768

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range and an SMA antenna connector for optimum performance.

$25.00 USD


Wheel Watcher Spacer for GM2/3

GMWWS

If you're using a Wheel Watcher with a GM2 or GM3, you need this encoder wheel spacer!

$1.95 USD


MF83ZZ Flanged double-shielded bearing, 3x8x3mm

14490

For Flanges Sake! Let it slide!

$1.00 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!