PhidgetAccelerometer 3-Axis
33015
This Product Has Been Discontinued, This Page Is For Reference Only.
90.48
USD
Qty
Price
1
$90.48 ea.
Looking for Phidgets 3-axis Accelerometers? We've got them. Order them from Solarbotics, because if you don't, we'll scare your cat (just a little).
Description [Hide]
This PhidgetAccelerometer is a three axis accelerometer that can measure +-3 gravities (+/- 3 x 9.81 m/s^2) change per axis. Comes complete with custom USB cable!
The module is calibrated at the factory and comes ready to use. No interface board needed - it simply jacks into your PC or a MAC through the USB port. It will measure both dynamic acceleration (vibration) and static acceleration (gravity or tilt).
What's that mean? You can do some really cool stuff with it, like:
• Sensing tilt in remotely operated vehicles.
• Capturing motion input for gaming.
• Capturing motion input for Human Interface Research.
• Capturing long term vibration data to help with the analysis of machinery performance.
• Detecting movement or presence by measuring structural vibration.
• Capturing motion input for gaming.
• Capturing motion input for Human Interface Research.
• Capturing long term vibration data to help with the analysis of machinery performance.
• Detecting movement or presence by measuring structural vibration.
Remember, you do not need any interface board other than just the sensor! Now, that is cool.
Documentation [Hide]
- [Documentation]: PhidgetAccelerometer 3-Axis Manual
You Might Also Like [Hide]
39250
Solarbotics Synapse-to-FTDI Adapter Kit
This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.
$22.95 USD
$2.86 USD
33156
Parallax USB RFID Reader Module
The Parallax RFID Reader Module is a 125 kHz RFID reader, with a USB connection.
$49.99 USD
$44.99 USD
39255
Solarbotics Synapse Breakout Board Kit
Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.
$5.50 USD
51774
Synapse RF300PD1 with SMA Connector
A module that runs at OTA (Over-The-Air) speeds up to 150Kbps and has a maximum transmission range of 3 miles! Perfect for when you need a separate frequency band when already using 2.4GHz nodes in an application. Just apply power and you've connected a mesh network.
$31.45 USD
35192
PING))) Bracket Kit with Servo
The Parallax PING sensor is cool, but it's more useful when mounted on a servo so it can scan the environment.
$24.99 USD
K SAND
Solarbotics Sandwich PCB & Components
The Sandwich robot is a line-following Robot. Sintra base (not included)
$49.95 USD
M1.4x10-P
M1.4 x 10mm Long Screw (5mm partial thread), 10 lot
Metric M1.4 x 10mm long, 0.3 pitch screw - partial thread. Package of 10.
$1.00 USD
$10.95 USD