WS2812B RGB SHIELD for WeMos D1 mini


2.49 USD
$2.49 ea.

This is the easiest way to connect a WS2812 LED to a Wemos D1 Mini!

Description [Hide]

The WeMos WS2812B RGB Shield is a digital full colour (16777216 colours) RGB LED light source. It is specifically designed for the WeMos mini and mini Pro ESP8266 based development boards. This shield includes two 8 pin headers.

You Might Also Like [Hide]


Matrix LED Shield V1.0.0 for WEMOS D1 mini ESP8266 development board

Here's a cool 8x8 LED Matrix Display designed specifically for a WeMos D1 Mini!

$3.49 USD


Flickery Flame Soldering Kit

Evil Mad Scientists' Flickering Flame, in Yellow/Red or White/Warm White

$5.50 USD


Grove - LED Bar 2.0

Another nice visual indicator for the Grove system, with a 10 segment display. 3.3-5V

$4.20 USD


8mm RGB Common anode LED, clear body

We've had some requests for a common Anode RGB LED, you asked, we delivered! So instead of the common pin going to ground it will go to Vcc and the signal wires go low (to ground). It seems backward to normal convention but some people like to roll that way!

$1.00 USD


Larson Scanner Kit

The Larson scanner is named after Glen A. Larson, the man responsible for producing both the original Battlestar Galactica and Knight Rider television shows.

$13.00 USD


Star Controller - 3 Watt RGB Star LED Controller Kit

The larger 3 watt RGB LEDs are very bright and colorful, but if you don't get the power just right - POOF! Now your RGB is R(nothin')B. The Star Controller tames this LED so you can power it up with 5 to 12V and use any regular 5V signal to control each channel.

$22.00 USD


The Solarbotics Learn to Solder Kit

Want to Learn how to solder? This kit gives you a few simple parts that can be soldered on to a board to give you a wearable blinking LED badge.

$8.00 USD


Adafruit Monochrome 128x32 I2C OLED graphic display

These are tiny, sharp, and most impressive OLED monochrome displays! Just about 1" diagonal, made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip.

$17.50 USD


430k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD


910 ohm Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!