ATmega328P-20PU w/ Arduino Firmware SKU: 28960-A
ATmega328P-20PU w/ Arduino Firmware
$4.50 USD
This particular ATmega328P-20PU comes programmed and tested with the Arduino Firmware.
In stock
Description
The Atmel AVR ATmega328 is used as the heart of many Arduino / Freeduino microcontroller development boards. The ATmega328 runs pretty much the same speed, with same pinout, but features more than twice the flash memory (30k vs 14k) and twice the EEPROM (1Kb vs 512b) of the ATmega168.
This particular ATmega328P-20PU comes programmed and tested with Arduino Firmware which is ready to drop into any standard DIP-mount Arduino-compatible board, like our own Freeduino kits.
Please Note: This product now comes with the Arduino 1.0 optiboot bootloader programmed into it. When programming via the Arduino IDE please select “Arduino Uno” under the Tools -> “Board” category instead of “Arduino Duemilanove w/ ATmega328”. This bootloader not only has faster upload speeds but is now backwards compatible with products that use a FTDI USB-TTL converter chip.
Flash | EEPROM | SRAM | Speed | Volts |
---|---|---|---|---|
32Kb | 1Kb | 2048B | 0-20MHz | 1.8-5.5V |
The AVR series of microcontrollers are right up there with Microchip PIC products. Powerful, inexpensive, and programmable with some very good open source software (look up GCC), with a vibrant user community.
Here are more key features:
- 28 Pin narrow DIP package (0.3″)
- 32Kb byte self-programmable Flash
- 1Kb EEPROM
- 2048 byte internal SRAM
- Two 8bit timer
- One 16bit timer
- 6 Pulse-width modulators
- 6 10-bit analog-to-digital converters (ADC)
- 2 8-bit ADCs
- USART
- SPI
- WDT
- 23-programmable I/O lines
- Has lots of other neat TLAs (three-letter acronyms)
Resources
More Info
Weight | 0.01 kg |
---|---|
Dimensions | 4 × 1 × 2 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
AXE Stack-28 Starter Kit (USB)
SKU: 28621Brand new to PICAXE? Here's an all-in-one bundle to get you started from the ground-level using the PICAXE 28 and a USB Cable interface$84.09 USDAvailable on backorder
Add to cart -
50-Series Push Pogo Probe Holder
SKU: PPH-50This little devices allow you to simply and easily install and replace existing 50-series pogo pins$1.50 USDIn stock
Add to cart -
Push Pogo Probe Holder – Style 40 size
SKU: PPH-40This is the holder for our now discontinued PP8S short pogo pins.$1.50 USDIn stock
Add to cart -
Push Pogo Pin – Cone Tip
SKU: PP12-100This 33mm (1.3") long cone tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
GM11a/12a/13a/14a Mounting Screw/Bolt
SKU: M1.7x035This metric bolt matches the threads on the face of the GM11a, GM12a, GM13a, and GM14a gear motors, making mechanical installations easier. Sold individually.$0.20 USDIn stock
Add to cart
Reviews
There are no reviews yet.