PICAXE-08M Starter Pack (Serial)

28530

14.72 USD
Qty
Price
1
$14.72 ea.

This kit includes everything you need to start working on the PICAXE-08M microcontroller.


Description [Hide]

Ideal for the classroom. Everything you need to begin programming and experimenting with the PICAXE-08M microcontroller, including a prototyping area for your circuits.

What's Included:

The PICAXE Editor Software is a free download, as is the complete PICAXE Manual.

The PICAXE-08 Proto Board is an electronic kit and requires assembly (~20 min. for a beginner, 5 min. for an expert). A soldering iron, solder and flush cutters (available separately) are required.

Resources:

PICAXE Manual Part 1 - Getting Started (.pdf)
PICAXE Manual Part 2 - BASIC Commands (.pdf)
PICAXE Manual Part 3 - Interfacing Circuits (.pdf)
Programming Editor (.exe)

You Might Also Like [Hide]

PICAXE-08M2 Chip

28412

PICAXE-08M2 microcontroller chip. Supports 6 input/outputs including 3 analog inputs.

$3.50 USD


3.5mm Stereo Jack (PICAXE Connector)

17850

This a high-quality stereo jack is great for use with the PICAXE download cable.

$1.50 USD


Gear Motor 3 - 224:1 90 Degree Shaft

GM3

This 224:1 gearmotor is very comparable to a hobby servo for power, at a fraction of the cost!

$5.75 USD


PICAXE-20x2 IC

28465

Enhanced 20 pin microcontroller with individual pin control, 64MHz option and additional features including i2c/spi bus support.

$4.50 USD


10k Resistor

R10k

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD


PICAXE-18 Tutorial Kit (Serial)

28430

The PICAXE-18 Tutorial Kit is a flexible PICAXE-18 development board that is ideal for the classroom or self study.

$45.95 USD


PICAXE-28X2 Shield Base (Kit)

28489

The PICAXE-28X2 shield base has been designed to be compatible with almost all 'shield modules' as used with the Arduino system. This a very affordable project board for PICAXE development!

$17.56 USD


Cyberpet Full Kit

28536

This low-cost project uses an 8 pin microcontroller to create an electronic pet with LED eyes and a piezo sounder voice that reacts to touch (via a push switch) and light (via a miniature LDR).

$6.80 USD


RFID Reader ID-12LA (125 kHz)

50790

This is a very simple to use RFID reader module with a built in antenna. Power the module, hold up a card, and get a Serial string output containing the unique ID of the card.

$29.95 USD


5V Boost Regulator

19210

The Pololu 5V Boost Regulator NCP1402 is a very tiny source of 5V from supply voltages as low as 0.8V.

$5.75 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!