RC-4 (SSR) Relay Control Board

27240

This Product Has Been Discontinued, This Page Is For Reference Only.

29.95 USD
Qty
Price
1
$29.95 ea.
2+
$26.95 ea.

The RC-4 SSR Relay Control Board safely lets your microcontroller drive AC load at up to 3A at 240VAC. Solarbotics is the only place to get EFX-Tek products in Canada!


Description [Hide]

Needing to drive more power in your prop or display that the DC power adapter can handle? Up the power safely with the RC-4 Relay control board.

This board lets you mount up to four solid-state relays (SSR), specifically the popular Crydom D2W203F series, which can switch 3-4A up to 240VAC (but do stay at 120V for safety!)

The RC-4 board features:

  • LED indicators for "hot" loads
  • Screw terminals suitable for upt to #14 gauge wire
  • 3-pin command line interface
  • Draws power from the host controller - no additional DC wiring required
  • Communicates with host controller via serial protocol (2400/38.4k Baud selectable)
  • Chainable with up to 4 RC-4 controllers

The RC-4 boards offers the following command vocabulary:

  • V - Get RC-4 version number
  • R - Set/Reset Individual Relay
  • S - Setup all relays (sets activation level of all relays)
  • X - Clear all Relays (deactivates all 4 relays)
  • G - Get Relay Status (Reports back to microcontroller the on/off status of all 4 relays)

Remember, although the DC-16 is designed for use with the Prop-1 or Prop-2, the simple serial command syntax can be easily used with practically any other microcontroller!

Documentation [Hide]

You Might Also Like [Hide]

21336

Basic Analog & Digital Kit

The Basic Analog & Digital Kit is a full course on analog and digital circuits with the BASIC Stamp.

$49.99 USD

27280

EFX-Tek RS-485 Adapter

The EFX-Tek RS-485 adapter is an ideal solution for putting multiple microcontrollers on a custom network.

$31.46 USD

39100

Robotics with the BoE-Bot Parts Kit

The Robotics with the BoE-Bot Parts Kit turns your Board of Education into a BoE-BOT Robot.

$89.99 USD

45050

Vacuum Pump - 12V

This air pump really blows! This pump operates at 12V and has enough power for most small projects.

$14.95 USD

44224

OpenBeam 5.5mm Hex Nut Driver

5.5mm hex nut driver for use with the OpenBeam system.

$13.00 USD

VPM2

Vibrating Disk Motor

The VPM2 is a replacement for the now unavailable venerable VPM. At 12mm dia x 3.4mm thick, it's smaller than the original, and has presoldered leads!

$3.95 USD

50230

LVBoost Micro Universal DC-DC Converter

Looking for a low, LOW voltage boost converter in a tidy package? Dimension Engineering's LVBoost is just the solution!

$19.95 USD

R2.2k

2.2K Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

25070

BASIC Stamp 2 Module

The original BASIC Stamp 2 Module is still a practical and versatile microcontroller for all kinds of embedded projects.

$48.95 USD

28489

PICAXE-28X2 Shield Base (Kit)

The PICAXE-28X2 shield base has been designed to be compatible with almost all 'shield modules' as used with the Arduino system. This a very affordable project board for PICAXE development!

$17.56 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!