XBee Connector Pack

27106

8.00 USD
Qty
Price
1
$8.00 ea.

Includes all the components you need to plug the XBee Board into your Make Controller, and interface with sensors and actuators directly.


Description [Hide]

So you have an XBee module, XBee Board and a controller. Here's a simple interface kit to mount them all together.

The XBee Connector Pack provides all the components needed to assemble a working XBee module with the

This is helpful if you want to connect devices directly to your XBee module.

The XBee Connector Pack Includes

  • 2 x 10-position sockets (female) for the XBee module itself
  • 1 x 14-position matched header and socket pair, 0.1" spacing
  • 1 x 6-position matched header and socket pair, 0.1" spacing
  • 1 x 8-position matched header and socket pair, 0.1" spacing
  • 2 x 6.8uF capacitors
  • 1 x 3.3V regulator

You Might Also Like [Hide]

51730

XBee-PRO Module - 60mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$38.45 USD

30000

RS-232 Driver Module - DCE

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).

$11.95 USD

60100

Solarbotics Arduino Freeduino Enclosure (SAFE)

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.

$9.95 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

14080

USB-A to Mini-B Cable (6 ft)

A good-quality, locally made USB-A to Mini-B cable, as usually needed for the TTLyFTDI and Freeduino

$5.95 USD

CDS

CdS Light Sensitive Resistor

The CdS is a light sensitive resistor offering a range of 160 ohm to 700k sensitivity.

$1.35 USD

50640

SparkFun XBee Explorer USB

This is a simple to use, USB to serial base unit for the XBee line.

$24.95 USD

52101

tinyCylon

The tinyCylon is a multi-mode LED Larson scanner kit with five LEDs that blink or glow in various patterns.

$9.95 USD

45020

Static Wrist Band

The Static Wrist Band is a low cost static strap that is perfect for single or low use situations.

$2.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!