BASIC Stamp 2px24 Module


78.95 USD
$78.95 ea.
$71.06 ea.
$67.10 ea.

The BASIC Stamp 2px24 Module is a practical (kind of like a screwdriver) and powerful (not at all like a giant missile) microcontroller for all kinds of embedded projects.

Description [Hide]

The BASIC Stamp 2px24 is the latest addition to the BASIC Stamp line of microcontrollers. It is 1.6 times faster than the BASIC Stamp 2p (executing approximately 19,000 PBASIC instructions/sec) and includes a built-in voltage comparator (I/O pins P0, P1 and P2) as well as built-in, user-configurable Pull-up Resistor, Schmitt Trigger and Logic Threshold circuitry on every I/O pin. In order to use the BASIC Stamp 2px24, you’ll need to download and install BASIC Stamp Editor v2.2 available for free download (see the Resources section).

Download the product brief for an overview of the BS2px24's additional commands and features, as well as changes to commands with timing (i.e., PULSOUT, SERIN/SEROUT, etc)

Documentation [Hide]

You Might Also Like [Hide]


BoE-Bot Tank Tread Kit

Customize your BoE-Bot for some serious off-roading with these rockin' new treads.

$34.95 USD


RF Link Transmitter - 434MHz

These wireless transmitters work with 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$3.95 USD


SparkFun Electric Imp Breakout

The SparkFun Electric Imp breakout board makes it easy to experiment with your electric imp IoT project.

$12.95 USD


6.8µF Tantalum Capacitor

6.8µF tantalum capacitors have low leakage and greater capacitance than monolithics.

$0.80 USD


QTI Line Follower Kit

The QTI Line Follower Kit adds line-following capability to the BoE-Bot.

$29.95 USD


3mm Sintra

This 8x12" 3mm thick expanded PVC sheet is available in multiple colours, and is excellent for building robot frames and shells

$3.25 USD


Raspberry Pi Zero Budget Pack

The Raspberry Pi Zero is like the hot-rod descendant to the original Pi - faster, leaner, and smaller. Here's an Adafruit bundle to get it on the road.

$44.60 USD


DPDT 5V Relay

This DPDT 5V relay is used for a good many robot projects, usually for motor power routing.

$3.50 USD


XBee Shield

This new revision fixes some minor spacing and labeling issues, but functionality remains the same. The XBee Shield simplifies the task of interfacing an XBee with your Arduino.

$24.95 USD


Push Pogo Pin 4 - Cup Tip

This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!

$1.25 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!