Solarbotics Stamp Stack II Microcontroller Kit
25030
35.00
USD
Qty
Price
1
$35.00 ea.
The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.
Description [Hide]
Designed to plug into any solderless breadboard, this 100%-compatible Basic Stamp 2 microcontroller is reverse-polarity protected, has a built-on serial programming connector and reset switch, and has an easily replaced interpreter & EEPROM.
Although somewhat larger, it's substantially less expensive than a true Parallax BS2 module, but still interfaces with our Sumovore Mini-sumo through the BS2-brainboard add-on.
Documentation [Hide]
- [Documentation]: Stamp Stack II Manual - May 24, 2010
- [Documentation]: Stamp Stack II Manual - July 2008
You Might Also Like [Hide]
K SV-BS2
Solarbotics Sumovore BS2 Brainboard
This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.
$15.95 USD
34020
Breadboard Voltage Regulator Kit
The BVR Breadboard regulator kit makes it easy to add regulated, switchable power to your breadboard by using practically any 2.1mm DC adapter!
$5.95 USD
K SV
Solarbotics Sumovore Mini-Sumo
The Solarbotics Sumovore Kit is a strong, modular design with over 500 man-hours of development and 21 prototypes behind it. It has more power, speed, and is less expensive than the Junun Mark III, Parallax Mini-Sumo, and Tab SumoBot.
$98.50 USD
R220OHM
220 ohm Resistor
5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.
$0.20 USD
30010
RS-232 Driver Module - DTE Version
The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DTE means it's configured as a "Data Terminal Equipment" (with 9 pins).
$11.95 USD
30000
RS-232 Driver Module - DCE
The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).
$11.95 USD
60100
Solarbotics Arduino Freeduino Enclosure (SAFE)
The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.
$9.95 USD
K TB
Solarbotics Turbot Tumbling Robot
The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!
$59.95 USD
33510
PhidgetTemperatureSensor Thermocouple 1-Input
Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors.
$60.00 USD
33250
Phidget Vibration Sensor
The Phidget Vibration Sensor is a piezo deflection sensor for the Phidget 8/8/8.
$10.48 USD