Solarbotics Pico Linear Servo Voltage Adapter Kit (5V to 3.6V)
USD $1.00
Like some electronics, this linear motion Pico servo doesn't like running at over 5V. Even slightly less is better. This adapter board adds a bit of voltage drop to a 5/6V system to make your servo happy.
DESCRIPTION
The 22090 Pico linear servo is a very cool device, but really doesn't like being run over 5V. To ensure that it's kept at this lower voltage level when being used on a 5 or 6V system, we put together this inexpensive voltage-drop adapter board. It's not as good as a dedicated 3.7V regulator, but in our tests, it's worked out just fine!
Kit includes:
- 1N4007 Rectifier Diodes (used to drop voltage) x 2
- Linear Servo Adapter PCB
- 3 pin JST connector, 1.5mm spacing
- Male pin strip, 3 positions (interfaces to female servo cable)
You might want to get an appropriate servo cable, depending on your use!
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.005 kg |
|---|---|
| Dimensions | 8 × 6 × 1 cm |
REVIEWS
Related products
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.