LAB-XUSB Experimenter Board

21689

This Product Has Been Discontinued, This Page Is For Reference Only.

179.95 USD
Qty
Price
1
$179.95 ea.

The LAB-XUSB Experimenter Board is a premium development platform for PICmicros, with LCD and keypad built-in.


Description [Hide]

The LAB-XUSB is a platform for experimenting with the Microchip PIC microcontroller. It contains all the required circuitry for the PIC to operate including 5-volt power supply, oscillator, reset circuit, as well as additional application circuits including switches, potentiometers, LEDs, LCD module, RS232 interface, USB interface and speaker, as well as a large proto-typing area that is perfect for your own custom circuits.

Users of the Lab-XUSB can design and build many different projects including a calculator, LCD clock, digital thermometer, LCD backpack, data logger and many more.

The LAB-XUSB can run programs written in assembler, C and PICBASIC or PICBASIC PRO. It includes an in-circuit programming connector so the resident PIC MCU may be reprogrammed on the fly (requires flash device) using programmers that support this feature like the EPIC Programmer and the melabs USB Programmer.

Features :

  • 40-pin ZIF socket for PIC MCU
  • 5-volt regulator
  • 20MHz oscillator
  • Reset button
  • 16 switch keypad
  • 2 potentiometers
  • 4 LEDs
  • 2 line by 20 character LCD module
  • Speaker
  • RC servo connector
  • RS232 interface
  • USB connector
  • Socket for digital to analog converter (device not included)
  • Socket for I2C serial EEPROM (device not included)
  • Socket for Dallas DS1307 real time clock (device not included)
  • Pads for Dallas DS18S20 temperature sensors (device not included)
  • In-circuit programming connector
  • Prototyping area for additional circuits


What's Included:

  • Fully Assembled and Tested LAB-XUSB
  • Documentation

    The Lab-XUSB is know to be Compatible with the following 40-pin PICs :
    PIC16C64(A), 16C65(B), 16C662, 16C67, 16C74(AB), 16C765, 16C77, 16C774, 16F74, 16F747, 16F77, 16F777, 16F871, 16F874, 16F874A, 16F877, 16F877A, 16F914, 16F917, 18C442, 18C452, 18F4220, 18F4320, 18F4331, 18F4410, 18F442, 18F4420, 18F4431, 18F4439, 18F4455, 18F448, 18F4480, 18F4510, 18F4515, 18F452, 18F4520, 18F4525, 18F4539, 18F4550, 18F458, 18F4580, 18F4585, 18F4610, 18F4620, 18F4680

    The PIC18F4550 is recommended.

    Size is 5.5" x 5.6"
  •  

     

     

     

    You Might Also Like [Hide]

    21150

    LAB-X2 Experimenter Board

    Looking for the LAB-X2 Experimenter Board ? The LAB-X2 Experimenter Board s a budget minded board for 28 & 40-pin PICmicro development. Order your LAB-X2 Experimenter Board online now !

    $34.98 USD

    28600

    PicBit-18 Kit

    The PicBit-18 Kit is an In-Circuit Serial Programming adapter for 18-Pin PICmicros.

    $8.95 USD

    28610

    PicBit-28 Kit

    The PicBit-28 Kit is an In-Circuit Serial Programming adapter for 28-Pin PICmicros.

    $8.95 USD

    21163

    LAB-X4 Experimenter Board

    The LAB-X4 Experimenter Board for 8 & 14-pin PICmicros.

    $61.98 USD

    50662

    SparkFun Liquid Level Sensor

    Need to measure fluid levels? This eTape sensor is a solid state, continuous fluid level sensor ideal for non-nasty environments (but including water).

    $39.95 USD

    29138

    Seeed Grove - GPS

    This Grove - GPS module is a cost-efficient GPS with serial interface.

    $29.90 USD

    KARDWBP-R

    Ardweeny BackPack with Red LEDs

    The RED LED Ardweeny BackPack - free your Ardweeny from the breadboard, and set it free to the world!

    $13.50 USD

    50836

    Blackberry Trackballer Breakout

    Four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball.

    $16.95 USD

    60112

    Gameduino Faceplate for the S.A.F.E.

    The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

    $3.00 USD

    52830

    PCBGrip M3x0.5 Knurled Nut (25 pack)

    Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3.

    $9.85 USD

    Currency


    Login

    Email:

    Password:

    Remember Me

    Forgot Your Password?

    Don't Have an Account?
    Sign Up!