BASIC Stamp 2 Homework Board


This Product Has Been Discontinued, This Page Is For Reference Only.


3.64 USD
$3.64 ea.

The BS2 Homework board is a very handy development board for your Basic Stamp 2 experiments.

Description [Hide]

The Basic Stamp 2 is really the workhorse of hobbyist microcontrollers, and Parallax has these new "Homework" boards that use a surface-mount BS2 module on a 3" x 4" board that also features a 9V battery clip, serial port connector, 5V voltage regulator and a small breadboarding space!

It features a "running" LED that's connected to the BS2's EEPROM clock, which only lights up if the BS2 is running. Put the module to sleep, and the LED turns off, making this have a very long battery life, even from just a regular 9V battery. This board also adds goof-proofing in adding 220 ohm resistors in series with all the I/O lines, protecting the module from mis-wiring. Nifty, eh?

Usually only sold in 10-packs from Parallax, we think these are simply too cool to not offer as individual units.

You Might Also Like [Hide]


Parallax USB to Serial RS-232 Adapter

The Parallax USB to RS-232 is a great little adapter that takes your mini-USB connector and converts it to a RS-232 interface!

$16.99 USD


Board of Education (USB)

The Board of Education (USB) is a handy BASIC Stamp experimenter board.

$69.95 USD


Board of Education (Serial)

The Board of Education (Serial)is a compact, solderless development board for BASIC Stamps.

$69.99 USD


Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD


BASIC Stamp 2 Carrier Board

This BASIC Stamp 2 Carrier Board is compact and inexpensive.

$11.87 USD


Resistor Bundle Set 1: 100ohm, 470ohm, 1k, 2.2k

10 resistors each of 100ohm, 470ohm, 1k, and 2.2k

$2.20 USD


5mm Water-clear Phototransistor

This 5mm Water-clear Phototransistor will pick up visible and infrared light and conduct current. When light reaches this high sensitive/fast response time component it's much like current reaching the base of a transistor which allows current to flow from collector to emitter.

$0.45 USD


Adafruit I2C / SPI Character LCD Backpack - v1

The Adafruit LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you.

$10.50 USD


Synapse "Getting Started" Receiver Bundle

Wireless control of RGB lighting, my my how technology is progressing! Team a few of these bundles up with a single Synapse Transmitter bundle to have multiple high power LEDs controlled by a Wii Nunchuk!

$51.64 USD


1/4" Hex shank to 3/8" Square socket drive adapter

Use sockets with your screw driver with this adapter.

$3.60 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!