Parallax SX48 Proto Board

21395

This Product Has Been Discountinued, This Page Is For Reference Only.

$14.99 USD
Qty
Price
1
$14.99 ea.

Parallax's SX48 Proto Board provides a low-cost, high quality, solution for using the surface mount SX48 easily. Way better than duct tape.


Description [Hide]

Notice: Parallax announces the End-of-Life for the SX series of Microcontroller. We will be halting production of this item when our inventories deplete. Sorry!

SX Line Production End of Life (EOL)
The Parallax SX microcontroller line has reached production EOL. The owner of the SX design (www.ubicom.com) has given Parallax final notice that we are to place a lifetime buy of wafers. We recognize this announcement will be difficult for customers who have designed the SX into their products. We share your disappointment.


Need a way to play with the Parallax SX48? The SX48 is a nice, tidy solution to using the surface mount SX48 easily. It offers a heckovalot more speed than the BS2SX, but it requires a bit more effort to use. The SX series of microcontrollers are the world's fastest series of 8-bit microcontrollers!

It Features:

  • Surface-mount SX48
  • LM2940 voltage regulator - input power supply of 6-9 VDC provides up to 1 Amp
  • SX-Key programming port with TTL oscillator mechanical interlock prevents both from being used at the same (which damages the SX-Key and TTL oscillator)
  • Three-position power switch (off, logic power, power to logic and servo ports)
  • Clock configurations supported with additional components sold by Parallax: TTL oscillator (DIP-8 package); ceramic resonator (SIP3 package); Crystal (HC/49 package)
  • Smart prototype holes for servo headers, DIP and SOIC8 components

Note: This product requires the SX-Key Programming Tool

As it uses a regular solder-on perfboard for prototyping, you might want to attach a small breadboard to the prototyping surface for less-than-permanent experiments!

For full details on these blazingly fast microcontrollers, visit the manufacturer's page at Parallax!

You Might Also Like [Hide]

Male Pin Strip - 3 Positions

MPin3

Based on 0.1" spacing, this 3-pin header spacing is a very popular way to interface sensors & accessories to your design. Ground / Voltage / Signal!

$0.20 USD


2 x AAA Battery Holder with Cover and Switch

BHoldAAA-2cell-Enc

For those of you building smaller devices, you may appreciate a holder for a pair of AAA batteries.

$1.50 USD


5V Boost Regulator

19210

The Pololu 5V Boost Regulator NCP1402 is a very tiny source of 5V from supply voltages as low as 0.8V.

$5.75 USD


ICD to 10 Pin Adapter

20110

The ICD to 10 Pin Adapter allows you to use an ICD programmer with the melabs adapters.

$19.95 USD


ATmega328P-20PU w/ Arduino Firmware

28960-A

This particular ATmega328P-20PU comes programmed and tested with the Arduino Firmware.

$4.50 USD


Phidgets IR Distance Adapter

33360

The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD.

$10.48 USD


Solarbotics Sumovore Mini-Sumo

K SV

The Solarbotics Sumovore Kit is a strong, modular design with over 500 man-hours of development and 21 prototypes behind it. It has more power, speed, and is less expensive than the Junun Mark III, Parallax Mini-Sumo, and Tab SumoBot.

$98.50 USD


Lithium Polymer (LiPo) Battery - 110mAh 3.7V

50889

Lithium polymer battery, but darn small!

$6.95 USD


RF Link Transmitter - 434MHz

50606

These wireless transmitters work with 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$3.95 USD


DIL 330 x 8 Resistor Array

28671

This Resistor Array houses 8 x 330ohm resistors that are all independent from each other in a Dual in-line package (DIP), unlike a Single in-line package (SIP) which has 1 shared pin.

$1.80 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!