Prop Clip

21194

This Product Has Been Discountinued, This Page Is For Reference Only.

14.99 USD
Qty
Price
1
$14.99 ea.

The Prop Clip snaps to the edge of Propeller processor sticks for easy usb-to-serial programming!


Description [Hide]

The Prop Clip provides a USB-to-serial port connection that is convenient for microcontroller programming and communication.

These tiny devices are capable of asynchronous communication at up to 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller and BASIC Stamp.

The Prop Clip is unique in that it snaps onto the edge of a PCB's serial connection pads, using less connecting hardware.

Note: USB A to Mini B Retractable Cable is included (#805-00010).

You Might Also Like [Hide]

Applied Sensors Kit

21326

The Applied Sensors Kit teaches you about interfacing the world to microcontrollers.

$89.95 USD


Basic Analog & Digital Kit

21336

The Basic Analog & Digital Kit is a full course on analog and digital circuits with the BASIC Stamp.

$44.95 USD


EFX-Tek RS-485 Adapter

27280

The EFX-Tek RS-485 adapter is an ideal solution for putting multiple microcontrollers on a custom network.

$31.46 USD


Flex Sensor 4.5"

50805

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. COOL! Add it to your clothes - ideal for interfacing with LilyPad Arduino!

$14.95 USD


3 x AAA Battery Holder with Cover and Switch

17012

Give your project a sleek look with this 3 x AAA battery pack with a built in on-off switch and stylish lid.

$1.95 USD


Adapter, 6VDC @ 500mA

34010

This is a general purpose unregulated power adapter that converts 120VAC@60 Hz (North American) to 6V DC at 500mA.

$9.95 USD


eSun 3mm PLA+ filament - Black - 1kg Spool

60704

1.75mm PLA+ filament for 3D printing. PLA+ is an excellent general purpose filament with a great finish, very rigid and biodegradable.

$24.99 USD


OpenBeam Shaft Clamp Kit

52660

The OpenBeam Shaft Clamp Kit allows you to clamp shafts anywhere on your OpenBeam project.

$8.00 USD


PCBGrip Tri Nut Accessory (pairs)

52822

Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem.

$4.60 USD


Propeller Education Kit - 40 pin DIP Version

21212

With its 8 parallel-processing cogs, the Propeller chip's unique design makes a variety of otherwise difficult microcontroller applications relatively simple

$99.99 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!