BASIC Stamp 1 Project Board

21182

29.99 USD
Qty
Price
1
$29.99 ea.

This Project board has a surface-mount BS1, power jack, DB-9 serial connection and voltage regulator. AND it comes with a breadboard, and a selection of jumper wires.


Description [Hide]

The Basic Stamp 1 microcontroller is the grand-daddy of all the easy-to-use microcontrollers on the market, so it's been around for a long time, and is very well proven. It's ideal for simple, single applications, but it's pretty darn tiny. Leave it to Parallax to resurrect it in a really convenient package, that's a great value!

This development board is only 3-1/4" x 2-1/2" (8.3 x 6.4 cm) in size, but includes:

  • 9V battery clip
  • 2.1mm power jack
  • DB-9 Serial programming connector
  • LM2936 5V regulator
  • Surface mount BASIC STAMP 1 microcontroller

That's just the board. It also comes with a small solderless-breadboard that sticks right on, and 10 jumper wires for your first experiments! Parallax also pre-wired 220 ohm resistors in series with all the I/O to make it goof-proof!

THIS is really a great value, especially if you have a simple application, or are just wanting to "get your feet wet" with microcontrollers.

Additionally, the PCB layout of prototype area will interface with other option kits:

Please note: The BS1 Project Board does not include a programming cable or power supply.

Documentation [Hide]

You Might Also Like [Hide]

Solarbotics Sandwich PCB & Components

K SAND

The Sandwich robot is a line-following Robot. Sintra base (not included)

$49.95 USD


Solarbotics Useless Box Kit

60005

It's a kit that builds something that ...turns itself off when turned on. Hence, the Useless Box!

$30.00 USD


Stamp Stack 2p Experimenters Board

25055

The Stamp Stack 2p Experimenters Board includes all the advanced features of the renowned BASIC Stamp 2p24 module and adds a Real Time Clock (RTC)with battery backup and a 4-Channel, 10-bit Analog to Digital Converter (ADC).

$79.95 USD


BASIC Stamp 2 Carrier Board

21200

This BASIC Stamp 2 Carrier Board is compact and inexpensive.

$11.87 USD


Solarbotics Sumovore BS2 Brainboard

K SV-BS2

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD


IC Hook with Pigtail

14014

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like DIP IC legs).

$4.95 USD


Carbon Monoxide Sensor - MQ-7

50826

This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO concentrations anywhere from 20 to 2000ppm.

$7.25 USD


Octal Inverting Buffer

74HCT240

This 74HCT240 octal (8 channel) inverter chip is more power efficient than the AC series, but can't drive as heavy loads. This makes it more suitable for solar BEAM applications.

$1.35 USD


Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit

18911

Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit.

$19.95 USD


Grove - Serial MP3 Player

29036

Simple MP3 playback in a Grove interface. Plug it in, feed the audio signal to an amplifier, and you're listening to music.

$16.10 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!