LAB-X1 Experimenters Board - Kit

21140

Sale!

69.98 USD
Qty
Price
1
$69.98 ea.

The Lab-X1 in kit form. Includes the PCB, diskette, and all components. This is an electronics kit. Assembly and soldering is required.


Description [Hide]

Please note we only have one of these kits left in stock, and this is the last one, because the manufacturer will not offer it as a kit any more!

The LAB-X1 contains the circuitry required by the PICmicro to operate: 5-volt power supply, oscillator, reset circuit, as well as additional application circuits. The crystal controlled oscillator includes jumpers to set speeds of 4MHz, 8MHz, 10MHz, 12MHz, 13.32MHz, 16MHz and 20MHz.

Application circuits include a switch matrix, potentiometers, LEDs, LCD module, serial EEPROMS, real time clock, temperature sensors, servo connectors, RS232 interface, RS485 interface, IR interface and speaker. A prototyping area is also included in case we missed your favorite circuit.

Many different projects may be created using the LAB-X1. Some examples include calculators, LCD clock, digital thermometer, LCD backpack, tone dialer, TV remote control and many more. The LAB-X1 can run programs written in assembler, C and PicBasic or PicBasic Pro.

The LAB-X1 includes in-circuit programming connectors so the resident PICmicro MCU may be reprogrammed on the fly (requires flash device) using programmers that support this feature. Because the LAB-X1 itself is not a programmer, a separate PIC MUC programmer, such as the melabs U2 Programmer is required to program the MCU.

All of the PICmicro MCU I/O pins are brought out to headers next to a 40-pin ZIF socket. This allows connection to off-board circuits as well as allowing on-board circuits to be connected to other pins, if desired. The LAB-X1 is designed to work with 40-pin PICmicro MCUs, but may be jumpered to work with smaller devices. It is recommended the LAB-X1 be used with the 40-pin PIC16F877A (available separately). This flash device has 8K of code space, 33 I/O pins, 8 ADC channels and may be reprogrammed again and again.

Features:

  • Inputs: 16 switch keypad, 3 potentiometers, IR, temperature, real time clock
  • Outputs: LED bargraph, 2x20 LCD module, speaker, DTMF, PWM, IR, 2 RC servo connectors
  • I/O: RS232 interface, RS485 interface
  • Serial EEPROM: I2C, SPI, Microwire
  • Misc: Reset button, 5-volt regulator, 40-pin ZIF socket for PICmicro MCU (device optional)
  • Jumper selectable oscillator from 4MHz to 20MHz
  • In-circuit programming/debug connectors
  • Prototyping area for additional circuits
  • Available assembled, as a kit or as a bare PCB
  • Size is 5.5" x 5.6"

 

The standard version includes:

  • 40-pin ZIF socket for PICmicro MCU (device optional)
  • 5-volt regulator
  • Jumper selectable oscillator from 4MHz to 20MHz
  • Reset button
  • 16 switch keypad
  • 3 potentiometers
  • LED bargraph
  • 2 line by 20 character LCD module
  • Speaker
  • 2 RC servo connectors
  • RS232 interface
  • Socket for RS485 interface (device not included)
  • Socket for I2C serial EEPROM (device not included)
  • Socket for SPI serial EEPROM (device not included)
  • Socket for Microwire serial EEPROM (device not included)
  • Socket for real time clock/serial analog to digital converter (devices not included)
  • Socket for Dallas 1620/1820 temperature ICs (devices not included)
  • EPIC in-circuit programming connector
  • Wiring for Microchip in-circuit debug connector
  • Prototyping area for additional circuits

Compatible with: PIC16C64A, PIC16C65A, PIC16C662, PIC16C67,PIC16C74A, PIC16C74B, PIC16C77, PIC16F1517,PIC16F1519, PIC16F1934, PIC16F1937, PIC16F1939,PIC16F724, PIC16F727, PIC16F74, PIC16F747,PIC16F77, PIC16F777, PIC16F874, PIC16F877, PIC16F877A, PIC16F884, PIC16F887, PIC16F914, PIC16F917,PIC16LF1904, PIC16LF1907, PIC18C442, PIC18C452,PIC18F4220, PIC18F4221, PIC18F4320, PIC18F4321,PIC18F4331, PIC18F43K20, PIC18F43K22, PIC18F4410,PIC18F442, PIC18F4420, PIC18F4423, PIC18F4431,PIC18F4439, PIC18F4450, PIC18F4455, PIC18F4458,PIC18F448, PIC18F4480, PIC18F44K20, PIC18F44K22,PIC18F4510, PIC18F4515, PIC18F452, PIC18F4520,PIC18F4523, PIC18F4525, PIC18F4539, PIC18F4550,PIC18F4553, PIC18F458, PIC18F4580, PIC18F4585,PIC18F45K20, PIC18F45K22, PIC18F45K80, PIC18F4610,PIC18F4620, PIC18F4680, PIC18F4682, PIC18F4685,PIC18F46K20, PIC18F46K22, PIC18F46K80

 

You Might Also Like [Hide]

21150

LAB-X2 Experimenter Board

Looking for the LAB-X2 Experimenter Board ? The LAB-X2 Experimenter Board s a budget minded board for 28 & 40-pin PICmicro development. Order your LAB-X2 Experimenter Board online now !

$34.98 USD

28600

PicBit-18 Kit

The PicBit-18 Kit is an In-Circuit Serial Programming adapter for 18-Pin PICmicros.

$8.95 USD

28610

PicBit-28 Kit

The PicBit-28 Kit is an In-Circuit Serial Programming adapter for 28-Pin PICmicros.

$8.95 USD

21163

LAB-X4 Experimenter Board

The LAB-X4 Experimenter Board for 8 & 14-pin PICmicros.

$61.98 USD

GM4-LG

GM4 Limited-Rotation Output Gear

This output gear changes the GM4 from continuous rotation to limited rotation.

$0.50 USD

33320

Phidget IR Reflective Sensor 10cm

This sensor can detect the presence of objects at a distance of 0 to 10cm regardless of the object reflective properties.

$10.48 USD

60864

eSun 1.75mm HIPS filament - Light Blue - 1kg Spool

1.75mm HIPS filament for 3D printing. HIPS is an excellent general purpose filament with high strength and a small amount of flexibility, and less prone to warp than ABS.

$30.00 USD

29106

Grove - Gas Sensor (MQ9)

The Grove MQ9 sensor specializes in sensing Carbon Monoxide, Methane, and Liquified Petroleum Gas vapour.

$8.10 USD

29074

Grove - Touch Sensor

It's a ready-to-use touch sensor switch compatible with the Grove system. Plug it in, tuck it in behind a non-metallic surface, and you are finished.

$4.20 USD

42030

Microcode Studio Plus

Microcode Studios Plus - For adding ICD to your PicBasic PIC programming experience!

$48.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!