Pololu Orangutan USB AVR Programmer


This Product Has Been Discontinued, This Page Is For Reference Only.

28.95 USD
$28.95 ea.

Want a tidy AVR-ISP compatible programmer that also acts as a USB to TTL converter? Pololu's Orangutan USB AVR programmer fits the bill!

Description [Hide]

The Pololu Orangutan USB Programmer is designed to look like a good ol' Atmel AVRISP hardware serial programmer, so it's compatible with practically all mainstream AVR programmers. It uses a Silicon Labs CP2102 "USB to UART" chip to interface your PC to your hardware, and it has a hidden trick up its sleeve.

It also acts as a USB to TTL adapter too! Move the blue "mode" jumper to the other side, and it ports a ground, Tx and Rx line to 3 pads you can use as a handy USB to 5V serial link converter!

Comes complete with 6" programming connector, but you still require your own USB to mini-B cable.

Documentation [Hide]

You Might Also Like [Hide]


OpenBeam Extrusion 30mm Length

This is the 'beam' part of 'Open Beam', the central building component for the system.

$1.00 USD


Pololu Wixel Shield for Arduino

This Arduino shield interfaces the Pololu Wixel wireless modules to your Arduino-compatible project, enabling simple wireless programming, debugging, and control using standard Arduino software.

$12.95 USD


Power Driver Shield Kit

This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current.

$19.95 USD


Freeduino SB-Protoshield

The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.

$12.50 USD


37 x 66mm Monocrystalline Solar Cell

This big brother of the SCC3733 is also an epoxy-encapsulated monocrystalline solar cell, but this one offers 8 volts and 44mA in a 37 x 66mm package!

$11.00 USD


Pololu 3Pi Line Following Robot

It's small, fast, and very well designed line-following/maze solving robot. And a great deal!

$79.96 USD


Pololu 3pi Expansion kit with cutouts

The 3pi is a speedy line follower, but sometimes you just want to add your own hardware to the mix. Here's the expansion board just for you!

$11.95 USD


Teensy USB Board, Version 3.5 without Pins

PJRC did it again! Arduino compatible, 32bit, 120MHz ARM Cortex M4, and 5V tolerant to boot!

$24.25 USD


Resistor Bundle Set 4: 1M, 1.5M, 2.2M, 3.6M

10 resistors each of 1M, 1.5M, 2.2M and 3.6M

$2.20 USD


MX-212 USB Drive Bay Kit USB-WB-BK

The MX212 - USB Driver Bay kit features everything you need to mount a 20 character x 2 line Blue USB LCD with a 24 key keypad interface, into a standard front mount PC Computer Bay.

$67.55 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!