XBee Adapter Kit - v1.1

18965

10.00 USD
Qty
Price
1
$10.00 ea.
2+
$9.00 ea.
50+
$5.00 ea.

This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Adafruit looked at all the XBee adapter boards available and decided to design something better.


Description [Hide]

This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Adafruit looked at all the XBee adapter boards available and decided to design something better:

  • Onboard 3.3V regulator to cleanly power your XBee, up to 250mA
  • Level shifting circuitry means that its trivial to connect it to 5V circuitry such as an Arduino without risk of damage
  • Two LEDs, one for activity (RSSI), the other for power (Associate)
  • 10-pin 2mm sockets included to protect the modem and allow easy swapping, upgrading or recycling
  • All the commonly used pins are brought out along the edge, making it easy to breadboard or wire up
  • Specifically created for use with an FTDI cable to connect to a computer via USB. This means that you can use or upgrade the adapter with a computer simply by plugging in a cable
  • For use with any XBee/Pro pin-compatible module

The kit includes a PCB and all components necessary to build the adapter, unassembled. Tools are not included. This kit is really easy and will only take 15 minutes to build, even if you've never soldered before.

Please note that the adapter does not include an XBee module, they must be purchased separately.

You Might Also Like [Hide]

51710

XBee Module - 1mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$23.45 USD

51700

XBee Module - 1mW Chip Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$25.45 USD

50828

SparkFun XBee Explorer Regulated

The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). This makes it SO much easier to start playing with XBee!

$9.95 USD

16090

Freeduino SB-Protoshield

The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.

$12.50 USD

51730

XBee-PRO Module - 60mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$38.45 USD

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

51045

Pololu Wixel Shield for Arduino

This Arduino shield interfaces the Pololu Wixel wireless modules to your Arduino-compatible project, enabling simple wireless programming, debugging, and control using standard Arduino software.

$12.95 USD

27106

XBee Connector Pack

Includes all the components you need to plug the XBee Board into your Make Controller, and interface with sensors and actuators directly.

$8.00 USD

50866

Sparkfun Big Easy Driver

The Big Easy Driver is a simple solution using an Allegro A4988 IC for driving a single bipolar stepper motor at up to 2A/phase to maximum 30V.

$19.95 USD

45035

Premium Jumper Wires Male/Female - 15cm (10-pack)

They're like little 15cm (6") high-quality extension cables for your breadboard. Actually, they ARE little 15cm high-quality extension cables for your breadboard!

$3.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!