Rosin Core Solder 60/40 - 0.8mm, 18g Tube SKU: 181998
Rosin Core Solder 60/40 – 0.8mm, 18g Tube
$3.19 USD
The 4890–4898 Sn60/Pb40 RA Solder Wire is an electronic grade solder wire. It uses a classical tin-to-lead alloy ratio, which is complemented with a RA-like flux core.
In stock
Description
The 4890–4898 Sn60/Pb40 RA Solder Wire is an electronic grade solder wire. It uses a classical tin-to-lead alloy ratio, which is complemented with a RA-like flux core.
The solder wires meet J-STD-004B, ASTM B 32, and exceeds J-STD-006C specifications. It melts at a slightly higher temperature and over a wider range than the 63/37 solder. It results in robust and reliable joints that are highly resistant to whisker formation.
The 489x leaded solders achieve a consistent solder and flux percentage through a state-of-the-art, extrusion, wire-drawing machine. This machine continually monitors the wire to prevent voids and ensure consistency, providing a top-grade solder wire
- Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
- Flux meets J-STD-004B
- Rosin-activated flux
- Fast wetting
- Fast flowing
- Non-corrosive residue
- Non-conductive residue
More Info
Weight | 0.02 kg |
---|---|
Dimensions | 6.12 × 6.04 × 6 cm |
Type | |
Chemistry | |
Diameter | |
Quantity | |
Packaging |
Only logged in customers who have purchased this product may leave a review.
Related products
-
3 x AAA Battery Holder with Cover and Switch
SKU: 17012Give your project a sleek look with this 3 x AAA battery pack with a built in on-off switch and stylish lid.$1.95 USDIn stock
Add to cart -
9V Battery Holder w/ Switch & 2.1mm Plug
SKU: 52229$4.00 USDThis is a 9V battery pack with on/off switch and a 2.1mm barrel plug, you get both parts and will have to solder them together. Use this to battery-power your Arduino (or other electronic projects).
In stock
Add to cart -
Li-Ion/Polymer Battery Charger/Balancer – 80W, 6A
SKU: 50840The iMax B6 Balance Charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. The B6 will balance charge LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.$35.95 USDIn stock
Add to cart -
Battery Holder 3-AA
SKU: 17010$2.50 USDThis battery holder uses 3 AA cells to power your electronics, robotic or embedded project. You can do without, but MAN, when you need to hold 3AA cells, you'll need it!
In stock
Add to cart -
2 x CR2032 – Coin Cell Battery Holder
SKU: 170082x CR2032 battery holder with 12" of wire.$1.95 USDIn stock
Add to cart
Reviews
There are no reviews yet.