Micro USB to 5-pin Breakout
17424
0.99
USD
Qty
Price
1
$0.99 ea.
These nifty little devices will allow you to pull power easily from a USB port!
Description [Hide]
Handy way to add a USB Micro connector to any project! These boards breakout all 5 pins of the Micro USB connector and are breadboard friendly.
Specifications:
- USB Micro
- 0.1" Spacing
- Breaks out pins:
- GND
- ID
- D+
- D-
- VBUS
Note: There are methods to trick the USB port to supply more power than default. If you are looking for more than 100mA, try this..
Most USB Chargers will supply 500mA easily.
You Might Also Like [Hide]
50550
Logic Level Converter
The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices.
$2.95 USD
14183
JST-PH-2.0 2-Pin Connector Plug w/ Wire
A dramatic tale of two wires. One red. One black. Joined by a single female JST connector. Of destiny.
$1.29 USD
60117
Raspberry Pi S.A.F.E. for V3
The Raspberry Pi S.A.F.E. is a useful, simple acrylic enclosure kit designed for your Pi V3.
$6.25 USD
14220
Micro Deans Plug (Pair)
Micro Deans plugs are usually used in RC vehicle applications but can also be used for all kinds of other high current, small form factor projects. They even have a polarity protection feature built into the design, bonus!
$1.00 USD
TBLK12
20A 12 Position Terminal Block
Need to do some heavy duty splicing? Check out this 20A rated 12 position terminal block!
$4.95 USD
50572
SparkFun USB to RS-485 Converter
This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485.
$19.95 USD
$0.20 USD
600247
Pushbutton Off/(On) Switch 16mm, illum Blue 12V, IP65
Pushbutton off/(on) Switch that illuminates blue.
$4.25 USD
Currency
Login
Privacy Policy Return Policies Terms Of Use
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.
© 1995-2019 Solarbotics Ltd.