DS75176 RS-485 Driver

17290

1.99 USD
Qty
Price
1
$1.99 ea.

The DS75176 is equivalent to the SN75176


Description [Hide]

The DS75176B is a high speed differential TRI-STATE bus/line transceiver designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to -7V), for multipoint data transmission. It is compatible with RS-422. The DS75176 is equivalent to the SN75176.

Documentation [Hide]

You Might Also Like [Hide]

TR2222

PN2222 NPN Transistor

This NPN transistor is similar to the TR3904, but can deliver higher maximum current at better efficiency ratings.

$0.15 USD

TR2907

PN2907 PNP Transistor

This PNP transistor is similar to the TR3906, but can deliver higher maximum current at better efficiency ratings.

$0.15 USD

21035

Breadboard Jumper Wire Bundle

This 70-piece flexible wire jumper kit is sure to replace your old-style solid-wire jumpers. These are more flexible, robust, and easy to use!

$6.00 USD

50550

Logic Level Converter

The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices.

$1.95 USD

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - break out the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

50500

Breakout Board for FT232RL USB to Serial

Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!

$14.95 USD

30010

RS-232 Driver Module - DTE Version

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DTE means it's configured as a "Data Terminal Equipment" (with 9 pins).

$11.95 USD

30000

RS-232 Driver Module - DCE

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).

$11.95 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

pph2

Push Pogo Probe Holder

Pogo-Pin probe holders for 1.01mm diameter pins

$1.25 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!