20T GT2 5mm bore Timing Pulley
14410
7.95
USD
Qty
Price
1
$7.95 ea.
20 Tooth 5mm Bore Pinion Pulleys for stepper motors, GT2.
Description [Hide]
These 5mm Bore Pinion Pulleys can attach directly to any of our stepper motors that have a 5mm output shaft. Simply slide the pulley onto the motor shaft and tighten the M3 set screws (2 of them), using a 1.5mm Hex key. These pulleys allow belts up to 6mm in width. They can be used for building pan and tilt systems, 3D printers, camera sliders, XY tables, robotic drive mechanisms, etc.
Specifications:
- 20 Tooth GT2
- 5mm bore
- 7mm tooth width
- Dual set screws
You Might Also Like [Hide]
14445
GT2 Timing Belt, sold by meter
This belt may not hold your pants up, but it works great with pulleys and pinions! Sold by the meter up to 10M in length! If you want a 5M length, order 5.
$6.00 USD
$8.95 USD
$5.95 USD
51510
Didel GM17 Encoder
Here's a really cool quadrature encoder and motor driver for the GM17 Gear motor designed by the micro-specialists at Didel.
$11.95 USD
Prop2508
2.55" Propeller
Looking for a small, well-made propeller for your projects? GWS makes a great series of propellers, and the EP2508 is a nice size for a pager motor!
$0.95 USD
m1.6x4-p
Metric M1.6mm x 4mm screw, Pan-head Package of 10
Metric M1.6 x 4mm long screw, 0.35mm pitch, Phillips pan-head, 10-lot
$4.00 USD
K SV-UPG1
Solarbotics Sumovore Baseplate Upgrade
For owners of Sumovores purchased prior to May 2005, this kit solidifies your Sumovore with a powder-coated steel baseplate!
$6.95 USD
hvjst3
3-pin JST-ZH Connector (1.5 mm Pitch)
The JST-ZH 3-pin connector is another common electronics interconnect standard.
$0.50 USD
33430
Phidgets Voltage Sensor
The Voltage Sensor measures the differential voltage between the input terminals and outputs the difference proportionally.
$19.00 USD