JST PH 2.0 connectors are becoming quite common, especially for devices expecting to be connecting to LiPoly batteries. If you don't have a LiPoly, wire up your own power supply and jack it in with this 190mm (7.5") 2-conductor JST-connector cable!

This connector is also part of the 14183 cable & plug set

Documentation ^[Hide]

[Schematic]: JST Connector Schematic

You Might Also Like ^[Hide]

14183

JST-PH-2.0 2-Pin Connector Plug w/ Wire

A dramatic tale of two wires. One red. One black. Joined by a single female JST connector. Of destiny.

$1.29 USD

BattR15

Lithium Polymer Battery - 2000mAh (Lipo)

These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry.

$12.95 USD

HVJST2

2-pin JST-PH Connector (2.0 mm Pitch)

The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector.

$0.65 USD

50873

Lithium Ion Battery - 400mAh

3.7V 400mAh LiPoly battery with an excellent 2C discharge rate for small projects.

$7.95 USD

14240

XT90 Power connectors

The XT90 is a high, HIGH current capable connector for DC battery connections.

$6.95 USD

TBLK12

20A 12 Position Terminal Block

Need to do some heavy duty splicing? Check out this 20A rated 12 position terminal block!

$4.95 USD

15026

SparkFun Cerberus USB Cable - 6ft

The Cerberus, it sounds really smart, and it really is! It provides a great solution for the age old problem of never having the right USB cable. This is a 3 in 1 USB cable that has a Mini-B, Micro-B and Standard-B on one side to a single USB-A male connector on the other.

$5.95 USD

15028

SparkFun Hydra Power Cable - 6ft

Behold, the Hydra! It doesn't have seven heads as you might expect, nor is it even a dragon, but it is a great way to get 5V to your project via 3 separate power connections broken out from a USB-A male connector.

$4.95 USD

21160

LAB-X3 Experimenter Board

A full featured 18-pin PIC development platform with all the circuitry required by the PICmicro MCU to operate, plus 5-volt power supply, oscillator, reset circuit, an RS-232 serial port, basic analog and digital I/O and a 20 character x 2 line LCD display.

$59.48 USD

14186

1.25mm pitch JST GH cable sets

These micro JST GH connectors with 10cm (3.9in) pig tails are perfect for tiny projects!

$0.85 USD

7.5" PH 2.0 Battery wire - JST with Black / Red

14180

Description ^[Hide]

Documentation ^[Hide]

You Might Also Like ^[Hide]

14183