The Phidgets Sensor Cable 350 is used for the analog input on the Phidget Interface Kit 8/8/8.
350cm (140") Sensor Cable for the analog input on the Phidget Interface Kit 8/8/8.
The Phidget 8/8/8 Interface Kit uses the USB interface to connect 8 analog inputs, 8 digital inputs and 8 digital outputs to your Phidgets sensor network.
The Precision Light Sensor measures human perceptible light level in lux.
Use this 60cm/24" sensor cable to plug in your Phidgets sensor to the Interface Kit 8/8/8.
The Phidget Interface Kit 0/0/4 is a simple usb device that allows you to control 4 relays via PC Software.
This is a general purpose unregulated power adapter that converts 120VAC@60 Hz (North American) to 12V DC at 1 Amp.
The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.
These infrared photodiodes are a proven light sensor in BEAM technology.
Sometimes...you just need pins. Lots of pins. Not sure how long, but lots. So here's a strip of 20 that's a convenient size to 'snik' apart to whatever length you need!
5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.
The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.
Forgot Your Password?
Don't Have an Account?Sign Up!