Use this 60cm/24" sensor cable to plug in your Phidgets sensor to the Interface Kit 8/8/8.
60cm (24") Sensor Cable for the analog input on the Phidget Interface Kit 8/8/8.
3-pin headers are used with MANY accessories, and some even use "lock tab" or "buckled" connectors that physically lock them into place. Here's a socket that mates with them!
The Phidget Vibration Sensor is a piezo deflection sensor for the Phidget 8/8/8.
Why use cut telephone wires when you can use these great male-to-male 100mm jumper wires?
The Phidgets Sensor Cable 350 is used for the analog input on the Phidget Interface Kit 8/8/8.
Behold, the Hydra! It doesn't have seven heads as you might expect, nor is it even a dragon, but it is a great way to get 5V to your project via 3 separate power connections broken out from a USB-A male connector.
The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors.
Acrylic Enclosure for Phidget Interface Kit (#3802)
The 3804 Enclosure is designed to protect the PhidgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.
Didel Module 0.3 Gears - 9-Tooth pinion, 0.97mm bore for 1mm shaft
The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector.
Forgot Your Password?
Don't Have an Account?Sign Up!