Gravitech MicroSD Card Adapter

13201

This Product Has Been Discountinued, This Page Is For Reference Only.

$14.99

USD

Qty
Price
1
$14.99 ea.

This is a simple MicroSD adapter card, that allows you to interface with any microcontroller.


Description [Hide]

This is a simple MicroSD adapter card. It allows you to interface with any microcontrollers. It is perfect for mass storage, WAV/MP3 player and data logging. The adapter breaks out the MicroSD socket to a standard 0.1" 8-pin header. It can be plug directly into breadboards. This adapter features innovations that set it apart from other SD card adapter. Innovations feature like on-board card detect LED, Push-Push socket, and 3.3V regulator. Which mean either 3.3V or 5.0V microcontroller can be connected directly with the board. You can even use this 3.3V to power external circuits up to 250mA.

MicroSD cards offer an inexpensive, flexible and reliable way to bring data logging and data storage solutions to your electronic design projects.

Pinout:

VIN: Input power to the SD card (3.3V to 6.0V)
GND: Common (Connects to the housing of the SD socket)
3V3: Output voltage from the on-board 3.3V regulator (250mA)
CS: Chip select
DI: Serial input data
SCK: Serial clock
DO: Serial output data
CD: Card detect (active low)

Features:

• On-board 3.3V regulator
• Connect directly to 3.3V or 5.0V microcontroller
• Card detect LED
• Include 8-pin male header
• Board dimension: 1.4”x0.8”

Documents:

MicroSD adapter schematic
MicroSD socket datasheet
SD card specification

You Might Also Like [Hide]

50450

Arduino USB Board (Uno R3)

The Arduino Uno is the all-new replacement for the favourite and popular Arduino Duemilanove. Now shipping R3!

$29.45 USD



L298

Motor Driver

The SGS Thompson L298 motor driver chip is a brute of a motor driver, designed for up driving 4 amperes at 46 volts.

$2.95 USD



31040

NunChucky Wii Nunchuck I2C Breakout Adapter

Use the NunChucky I2C Breakout Board Adapter to use your Wii Nunchuck controller in your own projects!

$3.00 USD



50720

Arduino Pro Mini 328 - 3.3V/8MHz

This is a 3.3V Arduino running the 8MHz bootloader, in a very small package - a Mini Arduino, you might say!

$9.95 USD



50725

Arduino Pro Mini 328 - 5V/16MHz

You need to wedge an Arduino into a really tiny spot? Simple - just use a SMD '328 IC. Oh... you want a reset, and voltage regulator too? Why didn't you say so!

$9.95 USD



33420

Voltage Divider

The Voltage Divider eliminates the need to connect a resistor to an analog input by putting a high precision potentiometer on the board to allow the adjustment of the 'fixed' resistor.

$7.25 USD



51005

QTR-1A Reflectance Sensor (2-Pack)

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following applications. This sensor is sold in packs of two units.

$4.25 USD



30310

Seeed Raspberry Pi Breakout Board v1.0

The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your raspberry pi with other components and modules.

$11.50 USD



R300OHM

300 ohm Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD



BHold9V-Barrel

9V Snap to 2.1mm Barrel Plug Cable

Need a battery for your Arduino that is high enough to regulate the voltage to down to a solid 5V? Well here comes the 9V Snap to 2.1mm Barrel Plug Cable to your rescue! It allows you to plug in 9V and 7.2V rechargeable batteries to anything with a 2.1mm Barrel jack on it.

$2.95 USD



Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!