Peggy 2 Awesomeness Bundle - Red

13110-RD

This Product Has Been Discountinued, This Page Is For Reference Only.

$156.40 USD
Qty
Price
1
$156.40 ea.

Save $20! Peggy 2 kit, AC adapter, extra button set, and 640 diffused 10mm red LEDs.


Description [Hide]

This item is on sale - save 15% off the $184.00 USD / $193.20 CAD retail price while quantities last.

This custom bundle features the Peggy 2 kit, plus a US/Canada AC power adapter, five extra buttons, and enough red LEDs to fill it up.

Peggy 2 is a greatly improved version of the original "Peggy" light-emitting pegboard display. Version 2 adds animation capability and Arduino compatibility. Like its predecessor, Peggy 2 provides a quick, easy, powerful and efficient way to drive a lot of LEDs-- up to 625-- in a big matrix covering almost a square foot of area. You can make an LED sign for your window, a geeky valentine for your sweetie, one bad-ass birthday card, freak the holy bejesus out of Boston, or instigate the next generation of low-pixel-count video games. Your call. It's a versatile, high-brightness display. How you configure it and what you do with it is up to you.


The display can run off batteries (3 'D' cells) or an optional ac adapter, and is designed to drive as many LEDs as you care to solder into the holes. The board can accommodate LEDs in any color and in several of the most common sizes, including 3mm, 5mm (standard T-1 3/4 size), and 10 mm.

What is Peggy 2?
Peggy 2 is a low-power multiplexed controller board that drives up to 625 LEDs of up to 10 mm size. Open-source and hackable. Arduino compatible.

  1. Peggy 2 supports static display or animation with individually addressable LED locations.
  2. Peggy 2 supports programming through a USB-TTL cable, using the popular Arduino software environment. (Just like programming a Boarduino or Bare Bones Boards.) You can also use an AVR ISP programmer if you prefer.
  3. Uses the popular ATmega328P microcontroller and a 16 MHz crystal oscillator, making it easy to run Arduino code on Peggy.
  4. Peggy 2 boards can be tiled side-to-side without a gap.
  5. I2C (aka "TWI") interface allows data to be streamed to one or more Peggy 2 boards over a single interface.
  6. Small "breadboard-style" prototyping area allows other components to be added on board.

 

What's new in Peggy 2?
Version 2.3 of the Peggy 2 board is now shipping (released February 2010). This incremental release features the following improvements:

  1. Peggy 2 can now be built with a hardware serial port, in the same way as Peggy 2LE.
  2. The Peggy 2 circuit board is now an extra thick at 0.100" (2.54 mm), for better stiffness on that giant board, especially when loaded with LEDs.

 

Printed circuit boards
The centerpiece of this kit is a giant, beautifully made printed circuit board. It is 11.320x14.875" (28.75x37.78 cm) in overall size, two-sided with plated through holes. The board is manufactured with black epoxy soldermask on both sides for high visual contrast, and component locations are labeled on the top side of the board with a white silkscreen. The boards are RoHS compliant (lead free), manufactured to UL 94V-0 standards, and fully electrically tested. Mounting holes are provided at all four corners. Additional holes are provided for hanging the display from a hook or string. Multiple Peggy 2 boards can be set side by side to have a visually continuous field of LEDs without gaps between them.

 

Building it
Peggy 2 is sold as a soldering kit [?]. Basic electronic soldering skill is required, and you provide basic soldering tools: a soldering iron + solder and small wire clippers. No additional knowledge of electronics is presumed or required. Easy "through-hole" construction and clear, full-color printed instructions. Assembly time: 1-2 hours plus time to solder the LEDs themselves. Not sure if this kit is for you? Download the full instructions, here (10 MB PDF File). An extended introduction to the project and its design is available here.


Programming it

Peggy comes pre-programmed with a routine that lights up all the LED locations, so you can make a basic LED sign or display without any programming at all.

Of course, with a little time, Peggy 2 can also do a whole lot more. The easiest way to get started is through the Arduino software environment, for which you will need a USB-TTL cable. You can download the Peggy2 Arduino Library (along with several example programs) here. The library is an evolving open source project and your own code contributions are welcome.

You can also find a technical discussion of programming Peggy 2 here, along with code examples for use with AVR-GCC.

You Might Also Like [Hide]

Serial OLED Module (16x2)

28622

OLEDs are simply the next step up in display technology. Sure, a regular LCD may work, but you should use OLEDs when you need a much brighter display, much better viewing angle and lower current consumption!

$25.50 USD


3A SPDT Slide Switch

SWT1A

Ever tried to wrestle a bear to the ground? No? Yeah, we haven't either, but that's just about the kinda power this 3A slide switch has!

$3.00 USD


Push Pogo Pin 4 - Cup Tip

PP4

This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!

$1.25 USD


Female Low Profile Socket Strip - 5 per

FPin5LP

Female Low profile socket strip - 5 per Strip, 0.100" (2.54mm) spacing

$0.23 USD


Arduino Pro Mini 328 - 3.3V/8MHz

50720

This is a 3.3V Arduino running the 8MHz bootloader, in a very small package - a Mini Arduino, you might say!

$9.95 USD


Junkbots, Bugbots, and Bots on Wheels

JBB

Need a book on simple, effective robotics? This is the one! Written by Solarbotics' founder Dave Hrynkiw with contributions by Mark Tilden

$24.99 USD


100:1 Mini Metal Sealed Gear Motor

GM20

The 100:1 Mini Metal Gear Motor is about 25% more motor than our GM12a (in speed, torque, and power consumption), but has an enclosed gearbox!

$19.75 USD


5V 200mA Step-Up Boost converter

50647

The NCP1402 is a 5V Step-up DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low ripple 5V output capable of sourcing up to 200 mA.

$5.95 USD


18-Pin DIP Socket Carrier

DC-18 Pin

The idea of a DIP socket is to allow easy insertion/replacement of chips in existing circuits.

$0.25 USD


Bus Pirate Cable

14012

Here is a 10-pin breakout cable for the Bus Pirate or use it for other things like a colorful collar for your pet or a 10-pin ISP header breakout, you know....whatever you want!

$4.95 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!