Wireless


Show: Items

Sort By:


69 Products Found


50745

XBee Explorer Dongle

This is the XBee Explorer Dongle unit for the XBee line.

$24.95 USD

39255

Solarbotics Synapse Breakout Board Kit

Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.

$5.50 USD

39291

Getting Started with Synapse Bundle

A great introduction to starting out with Radio Frequency (RF) Networking. Use your computer to control a remote application or have the application control the computer. This bundle + guide will get you up and running with RF networking in a practical way.

$76.93 USD

29240

ESP-12F AP+STA Remote Serial Port WIFI Controller / Module

The ESP8266 (ESP-12F AP+STA) is a nice "Internet of Things" microcontroller with Wifi (or as a wifi bridge for your project)

$5.95 USD

51770

Synapse RF220UF1

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range, and switchable internal /external antenna.

$29.95 USD

51769

RF220SU SNAP Engine, 2 Mbps 2.4 GHz

The SNAP Engine Model RF220SU is an IEEE 802.15.4, lowpower, highly reliable solution for embedded wireless control and monitoring networks.

$29.95 USD

29250

ESP8266 ESP-32

The much-anticipated ESP32 is here: Bluetooth, Wifi, Dual Core, IoT just became doable!

$7.95 USD

29248

ESP01 programmer

The ESP-01 is a great wifi / IoT / Arduino "chewing gum" piece of technology, but programming it is a bit of a technical issue. Fix that with this inexpensive programmer module.

$5.95 USD

IR1

Infrared Optical Sensor

These infrared photodiodes are a proven light sensor in BEAM technology.

$1.35 USD

IR-LED

Infrared LED Emitter

Standard sized T1-3/4 infrared emitting LED.

$0.60 USD

50478

LilyPad XBee

The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.

$14.95 USD

16090

Freeduino SB-Protoshield

The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.

$12.50 USD

33150

PhidgetRFID Kit

This kit contains a 125 KHz RFID reader and additional parts.

$75.00 USD

51762

3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD

50828

SparkFun XBee Explorer Regulated

The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). This makes it SO much easier to start playing with XBee!

$9.95 USD

50640

SparkFun XBee Explorer USB

This is a simple to use, USB to serial base unit for the XBee line.

$24.95 USD

29246

AI-Thinker ESP8266 ESP-01 Wifi microcontroller

One of the cheapest "go-to" chipsets for building an "Internet of Things" device. With b/g/n Wifi and 8MBit Memory

$4.50 USD

30314

Wio Node

An small ESP8266 based SoC with full Grove Support, LiPo Support, and a mature API

$11.50 USD

51750

Synapse RF100PD6 with SMA Connector

Looking for 802.15.4 Zigbee-like device with smarts? XBee with more features? Check out Synapse modules! Small, low-power, 2.4 GHz plug-in transmitter-receiver modules, with an extended range up to three miles and power consumption as low as 2.5uA.

$25.00 USD

51700

XBee Module - 1mW Chip Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$25.45 USD

51710

XBee Module - 1mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$23.45 USD

51730

XBee-PRO Module - 60mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$38.45 USD

27106

XBee Connector Pack

Includes all the components you need to plug the XBee Board into your Make Controller, and interface with sensors and actuators directly.

$8.00 USD

33230

Parallax RFID - 50mm Round Tag

This 50mm Round Tag is a 125 kHz RFID Tag.

$1.29 USD

33231

Parallax RFID Blue Eye Key Fob Tag

This is a nifty blue fob tag for all you wonderful fobbing needs.

$0.99 USD

33155

Parallax RFID Reader Module

The Parallax RFID Reader Module is a 125 kHz RFID reader.

$49.99 USD

33156

Parallax USB RFID Reader Module

The Parallax RFID Reader Module is a 125 kHz RFID reader, with a USB connection.

$49.99 USD

33200

Phidget RFID - 30mm Disc Tag

The Phidget RFID - 30mm Disc Tag is a 125 kHz circular RFID Tag.

$2.86 USD

33210

Phidget RFID - Credit Card Tag

The Phidget RFID - Credit Card Tag is a 125 kHz Credit Card Sized RFID Tag.

$1.90 USD

50897

SparkFun Electric Imp Breakout

The SparkFun Electric Imp breakout board makes it easy to experiment with your electric imp IoT project.

$7.77 USD

50899

Electric Imp Shield

So you have an Electric Imp (or plan on buying one), what's next? Well you're going to need a breakout for it, here's where the Electric Imp Shield comes in. This shield gives you to the interface to adapt an Arduino-compatible board to a WiFi enabled Cortex-M3 core development module.

$9.98 USD

28670

PICAXE XBee Connect Board

The PICAXE Connect board lets you hook up a Digi XBee module or LocSense GPS module to your PICAXE or (using a MAX3232 chip) a computer.

$21.95 USD

50645

SparkFun Breakout Board for XBee Module

This is a simple breakout board for the popular XBee product from Maxstream.

$2.95 USD

29200

Roving Networks RN-XV Wi-Fi Module - UFL connector

What a sweet idea! A 802.11b/g wifi module with a XBee plugin footprint! This model features a UFL antenna connector.

$34.95 USD

29205

Roving Networks RN-XV Wi-Fi Module - SMA connector

What a sweet idea! A 802.11b/g wifi module with a XBee plugin footprint! This model features a SMA antenna connector.

$34.95 USD

50835

XBee Shield

This new revision fixes some minor spacing and labeling issues, but functionality remains the same. The XBee Shield simplifies the task of interfacing an XBee with your Arduino.

$14.95 USD

51406

FreeM Infrared Controller

FreeM is a wireless Infrared I2C controller for completely stand-alone programming and control of BlinkM smart LEDs. It's like an invisible wire linking a Remote, a LinkM, and/or an Arduino to BlinkMs.

$19.00 USD

52225

SYSTEM 6-in-1 Universal Remote Control

A remote! Control! For controllify-ing all your remotes! Now this remote could be used as the classic universal type remote but hey what fun it that?!?! Use this remote to control Robots, scorpions, and other ThingMs....er...things! Well maybe not scorpions but snakes for sure!

$5.00 USD

51045

Pololu Wixel Shield for Arduino

This Arduino shield interfaces the Pololu Wixel wireless modules to your Arduino-compatible project, enabling simple wireless programming, debugging, and control using standard Arduino software.

$12.95 USD

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - break out the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

39252

Solarbotics Synapse-XBee Adapter Kit

Ever want to change the species of your RF modules? Now you can evolve your XBees into Synapses! Well that doesn't really make sense but, hey, it doesn't change the fact that you can now do it with this kit!

$7.50 USD

MPin12-2mm

2mm Pin Strip Single Row Header - 12 per

Male Strip - 12 per Strip, gold flash on 2mm spacing

$1.00 USD

MPin10-2mm

Male 10-pin Headers-2mm spacing

With electronics, there's connections, which usually means sockets and pins.This header strip fits into any socket strip designed for Xbees.

$0.57 USD

FPin12-2mm

Female 12-pin Header-2mm Spacing

Female Socket Strip - 12 per Strip, gold flash pin surfacing, 2mm spacing. These pins are perfect for interfacing to our Synapse RF engines!

$1.00 USD

50608

RF Link Transmitter - 315MHz

These wireless transmitters work with 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$3.95 USD

50602

RF Link Receiver - 4800bps (434MHz)

These wireless receivers work with 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$4.95 USD

50606

RF Link Transmitter - 434MHz

These wireless transmitters work with 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$3.95 USD

50604

RF Link Receiver - 4800bps (315MHz)

These wireless receivers work with 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$4.95 USD

51776

Synapse RF266PC1 - XBee Footprint, with Chip Antenna

Want to try Synapse, but only have XBee hardware? HAH - Synapse thought of that with their new RF266PC1. Synapse power in an XBee footprint!

$31.95 USD

30025

Roving Networks RN-XV Wi-Fi Module - Wire Antenna

What a sweet idea! A 802.11b/g wifi module with a XBee plugin footprint! This model uses a built in wire antenna.

$37.00 USD

39270

Solarbotics Synapse SMA X-Change Bundle

Want to try out a Synapse SNAP network where you have an Xbee network? Assemble this bundle and x-change your pre-existing Xbee hardware with this drop-in replacement.

$40.50 USD

39275

Solarbotics Synapse RF100PD6 SMA Coordinator Bundle

Synapse SNAP modules are super-useful, and here's a bundle to get a PC base-station up and running!

$47.61 USD

39280

Solarbotics Synapse RF100PC6 Snap X-Change Bundle

Want to try out a Synapse SNAP network where you have an Xbee network? Assemble this bundle and x-change your pre-existing Xbee hardware with this drop in replacement.

$25.16 USD

39285

Solarbotics Synapse RF100PC6 Coordinator Bundle

Synapse SNAP units also make great PC-to-network node interfaces. Here's a bundle to get you started!

$42.21 USD

50790

RFID Reader ID-12LA (125 kHz)

This is a very simple to use RFID reader module with a built in antenna. Power the module, hold up a card, and get a Serial string output containing the unique ID of the card.

$29.95 USD

17700

5mm Water-clear Phototransistor

This 5mm Water-clear Phototransistor will pick up visible and infrared light and conduct current. When light reaches this high sensitive/fast response time component it's much like current reaching the base of a transistor which allows current to flow from collector to emitter.

$0.45 USD

51765

Synapse RF200P81 with Chip Antenna

XBee is good; Synapse is just better. More I/O, embedded python, and generally better range at comparable cost! This particular module is 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 450M (1500') range and a chip antenna for compact installation.

$23.95 USD

51774

Synapse RF300PD1 with SMA Connector 915MHz

A module that runs at OTA (Over-The-Air) speeds up to 150Kbps and has a maximum transmission range of 3 miles! Perfect for when you need a separate frequency band when already using 2.4GHz nodes in an application. Just apply power and you've connected a mesh network.

$31.45 USD

51837

Wireless SD Shield

This Arduino shield rocks a socket for wireless modules, such as Digi Xbee, so that you can float your bits and bytes of data through air with the greatest of ease.

$29.15 USD

50676

Antenna GPS 3V Magnetic Mount SMA

Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph. 5 meter cable terminated with standard male SMA connector.

$12.95 USD

52120

Wicked Receiver Shield Kit

Want to do some wireless communication for the Arduino, but on the cheap? The Wicked Devices 433MHz Receiver Shield will give your Arduino-compatible ears!

$11.00 USD

30303

SeeedStudios Long Range RF Link Kits w/ Encoder and Decoder

You want to make this thing talk to that thing waaay over there? Try the SeeedStudio super-long range 433Mhz RF link bundle! They're claiming 2KM range for wireless data transport & remote control use!

$18.95 USD

29110

Seeedstudio Bluetooth Bee

Bluetooth! XBee! Arrgh - which way to go? Well, the Bluetooth Bee lets you jam a Bluetooth SPP module into an existing Xbee socket ed project!

$23.95 USD

29210

Roving Networks RN42-XV Class 1 Bluetooth - XBee Compatible

Easily add Class 1 Bluetooth to any of your Xbee enabled projects! This module allows your project to be up to 20 meters away.

$24.95 USD

19042

Wireless USB Adapter

USB WiFi (802.11b/g/n) Module For Raspberry Pi and more

$13.50 USD

29098

Grove - NFC Tag

Near Field Communications Tag in a Grove module.

$21.50 USD

51740

XBee WiFi Module - Wire Antenna

This is the XBee WiFi Module with wire antenna from Digi.

$43.95 USD

29156

Grove - BLE (dual model)

Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions.

$22.50 USD

29252

ESP-01 Serial Breakout board with Vreg & Shift levelers

Simple logic-level-corrected serial interface for the ESP-01 wifi module, with voltage regulation.

$3.00 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!