Show: Items

Sort By:

24 Products Found


Synapse RF220UF1

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range and switchable internal /external antenna.

$25.00 USD


Solarbotics Synapse Breakout Board Kit

Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.

$5.50 USD


Synapse "Getting Started" Transmitter Bundle

Add a Wii Nunchuck and battery to this bundle and you'll have a simple Joystick and 2 button interface for all kinds of wireless applications. Team this bundle up with a few Synapse Receiver bundles to control multiple high power LEDs!

$49.99 USD


Synapse "Getting Started" Receiver Bundle

Wireless control of RGB lighting, my my how technology is progressing! Team a few of these bundles up with a single Synapse Transmitter bundle to have multiple high power LEDs controlled by a Wii Nunchuk!

$56.50 USD


3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD


Synapse RF100PC6 Module - Integrated Antenna

Small, low-power, 2.4GHz plug-in 802.15.4 -based transmitter-receiver modules, with an extended range up to 2.5 miles and power consumption as low as 2.5uA.

$35.00 USD


Synapse RF100PD6 with SMA Connector

Looking for 802.15.4 Zigbee-like device with smarts? XBee with more features? Check out Synapse modules! Small, low-power, 2.4 GHz plug-in transmitter-receiver modules, with an extended range up to three miles and power consumption as low as 2.5uA.

$39.00 USD


Synapse ProtoBoard (w/o module)

The SN171 Synapse ProtoBoard is a very convenient way to connect any Synapse SNAP module to a RS232 port - ideal for playing with your new RF Engine!

$46.00 USD


Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD


2mm Pin Strip Single Row Header - 12 per

Male Strip - 12 per Strip, gold flash on 2mm spacing

$1.00 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!