The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.
This board mates directly with the Arduino USB board and allows the Arduino to wirelessly communicate over a modified ZigBee protocol using the popular XBee module from MaxStream.
If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!
The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). This makes it SO much easier to start playing with XBee!
The SN171 Synapse ProtoBoard is a very convenient way to connect any Synapse SNAP module to a RS232 port - ideal for playing with your new RF Engine!
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Adafruit looked at all the XBee adapter boards available and decided to design something better.
Includes all the components you need to plug the XBee Board into your Make Controller, and interface with sensors and actuators directly.
The PICAXE Connect board lets you hook up a Maxstream XBee module or LocSense GPS module to your PICAXE or (using a MAX3232 chip) a computer.