Wired


Show: Items

Sort By:


37 Products Found


17422

On-the-go Micro USB connector

Cool tiny USB OTG Adapter!

$2.99 USD

50550

Logic Level Converter

The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices.

$1.95 USD

17246

Micro USB to USB Type C connector

These nifty adapters are super handy. They convert USB Micro cables to USB Type C. They are handy for charging new phones, and when you need data transfer in a pinch.

$2.00 USD

29244

ESP8266 Adapter Board

ESP8266 ESP-12 / ESP-12E Adapter Plate with full IO.

$0.99 USD

14044

Mini/Micro to HDMI converter

2 in 1 HDMI Female to Mini Micro HDMI Male V1.4 90 Degree Converter Adapter

$3.29 USD

14072

USB to Serial PL2303 Breakout Cable

When you need to connect a serial device to a USB port, use this converter cable with the individual lines already broken out. Based on the prolific PL2303TA chip, directly compatible with win XP/VISTA/7/8/8.1 systems and most other OS's.

$4.95 USD

14042

HDMI Male To DVI-D Female 24+1 DVI Converter Adapter for LCD Monitor

HDMI Male to DVI-D Female Video Adapter.

$7.25 USD

14046

HDMI Male to VGA With Audio HD Video Adapter

Ever wanted to add HDMI to an older VGA monitor? This does it with audio breakout!

$15.99 USD

28405

USB PICAXE Programming Cable

This 6' long cable allows you to program your PICAXE using a USB port on your PC.

$21.95 USD

31040

NunChucky Wii Nunchuck I2C Breakout Adapter

Use the NunChucky I2C Breakout Board Adapter to use your Wii Nunchuck controller in your own projects!

$3.00 USD

14052

I2C-It Y-Cable Harness set

The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness and pin set to set up multiple sensors!

$2.84 USD

50510

FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD

50512

FTDI Basic Breakout (5V)

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards.

$14.95 USD

14050

I2C-It Y-Cable Harness

The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness to hook them up!

$2.50 USD

1810

USB type B Connector

USB type-B connectors are the big ugly square ones. Easy to find cables for, but they sure ain't very pretty. So they still have value. Get them here at Solarbotics!

$1.29 USD

17290

DS75176 RS-485 Driver

The DS75176 is equivalent to the SN75176

$1.99 USD

17211

FT232RL USB Driver

Begone, hard-to-program USB devices! At the hands of my FT232RL chip, you will behave like a serial comm port!

$4.50 USD

17280

ST232ACN

he ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard.

$1.95 USD

31050

Ethernet-SPI/Bus Module

Add ethernet connectivity to your project with the Wiznet WIZ811MJ module. Ready to go on a convenient board!

$24.95 USD

21197

Parallax USB to Serial RS-232 Adapter

The Parallax USB to RS-232 is a great little adapter that takes your mini-USB connector and converts it to a RS-232 interface!

$16.99 USD

30000

RS-232 Driver Module - DCE

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).

$11.95 USD

30010

RS-232 Driver Module - DTE Version

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DTE means it's configured as a "Data Terminal Equipment" (with 9 pins).

$11.95 USD

50572

SparkFun USB to RS-485 Converter

This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485.

$19.95 USD

50500

Breakout Board for FT232RL USB to Serial

Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!

$14.95 USD

28606

VDrive2 USB Module

Add a USB drive or thumbdrive to your microcontroller!

$28.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!