Solarbotics


Show: Items

Sort By:


173 Products Found


BASPF

Ardweeny Starter Pack

Get started making tiny Arduino projects with the Ardweeny Starter Pack! There's no need to leave your full Arduino board in your project since it's great for prototyping, just drop in an Ardweeny which is about 1/3 the cost and much, much smaller.

$24.90 USD

BAPP

Ardweeny Prototype Pack

The Ardweeny Prototype Pack gives you the ability to get your Ardweeny project figured out before you make the giant leap of soldering it all together for it's final presentation. Think of this pack as the scrimmage before the big game!

$29.98 USD

BATPF

Ardweeny Triple Pack + FTDI

Triple the flavour, Triple the Fun, that the guarantee of Solarbotics Triple mint......wait a second...this isn't a Gum commercial!!! But it is a announcement for our Ardweeny Triple Pack which gives you 3 Ardweenys and a FTDI adapter for a reduced price.

$39.98 USD

BAPrPk

Ardweeny Project Pack

The Ardweeny Project Pack was created for you to sink your small Arduino-compatible project directly into it's application right away. If you like microwave dinners and pizza pops this bundle is for you, and even if you don't it's for you as well!

$29.94 USD

UBB

Ultimate BrutusBot Bundle

This is truly the Ultimate BrutusBot! It will do robotic front flips through the snow and keep on going!

$119.00 USD

SCC3733

37 x 33mm Monocrystalline Solar Cell

This epoxy-encapsulated monocrystalline solar cell offers 6.7V and 20mA in a 37x33mm package. Now updated with the Miller Engine circuit!

$8.00 USD

GM2

Gear Motor 2 - 224:1 Offset Shaft

This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!

$5.75 USD

GM3

Gear Motor 3 - 224:1 90 Degree Shaft

This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!

$5.75 USD

SW

2-5/8" Diameter Servo Wheel

This wheel keys into most standard servo output shafts for easy wheel mounting.

$3.25 USD

28630

AXE Stack-18 Starter Kit (Serial)

Brand new to PICAXE? Here's an all-in-one bundle to get you started with the PICAXE-18X from the ground-level!

$48.42 USD

28620

AXE Stack-28 Starter Bundle (Serial)

Brand new to PICAXE? Here's an all-in-one bundle to get you started from the ground-level!

$49.94 USD

KARDW

Solarbotics Ardweeny

Looking to build the smallest, handiest, bread-board friendly Arduino-compatible? The Ardweeny fits on the back of the included ATmega328P, taking up no more valuable breadboard space than the microcontroller itself!

$9.95 USD

28922

The Solarbotics SketchBoard

A fully assembled surface mount Arduino-compatible.

$17.50 USD

90000

Learn to Solder Kit Bundle

This extended version of Learn to Solder Kit comes with all the necessary tools for learning and building using soldering!

$35.31 USD

90010

Learn to Solder Herbie

The latest version of the Solarbotics Herbie the MouseBot, now with tools for the seamless build.

$66.35 USD

90065

Grove Education Pack - Basic Lab Bundle

The Solarbotics Grove Education Pack is a complete bundle to teach a basic course in electronics and programming.

$302.48 USD

90066

Grove Education Pack - Expanded Lab Bundle

The Solarbotics Grove Education Pack is a complete bundle to teach a basic course in electronics and programming.

$378.72 USD

60005

Solarbotics Useless Box Kit

It's a kit that builds something that ...turns itself off when turned on. Hence, the Useless Box!

$30.00 USD

90050

ARDXS Bundle

Arduino Experimenter's kit (SketchBoard edition) bundled with one of the most definitive books on Arduino available on the market today.

$92.09 USD

39255

Solarbotics Synapse Breakout Board Kit

Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.

$5.50 USD

60140

SB-FireFly

This coin-cell powered microcontroller runs three LEDs through button selectable light blinking sequences with smooth transitions. Use it to teach soldering, have a late night blinky party, or hack into your own creation.

$10.50 USD

BBB

Brutusbot Electronics Bundle

Our Brutusbot kit is capable of destruction and whimsical grace but it ain't going anywhere without a brain! Enter the Brutusbot Electronics Bundle, the totally open-source controller plus motor driver system to get your Brutusbot on it's warpath or to it's next dance recital.

$68.95 USD

90020

Learn to Solder - The Useless Box

This kit is a complete starter kit to get you from 0 to useless in no time flat! We include the soldering iron, solder, screwdriver, and some very nice flush cutters.

$60.48 USD

KMMS

The Solarbotics Solar Marble Machine Kit

Marble Motion kit, enabled by Solarengine technology that keeps on moving even in low indoor light!

$33.00 USD

60355

The Solarbotics Learn to Solder Kit

Want to Learn how to solder? This kit gives you a few simple parts that can be soldered on to a board to give you a wearable blinking LED badge.

$8.00 USD

15060

GroovyNoodle Silicone Jacketed Wire - 8 pack

This exceptionally flexible wire is perfect for wearable applications - super noodly and smooth.

$27.00 USD

K HM2

Solarbotics Herbie the Mousebot v2

Herbie the Mousebot is a very quick, easy-to-build, light-chasing robot kit with functional whisker and tail sensors!

$40.00 USD

ARDXS

Arduino Experimenter's Kit SketchBoard Edition

The Solarbotics edition of the Oomlout Arduino Experimenter's Kit makes learning Arduino microcontrollers fabulously straightforward!

$74.95 USD

60410

The Solarbotics GraviTrack Battery Marble Machine Kit

Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family.

$33.00 USD

60415

The Solarbotics GraviTrack Solar Marble Machine Kit

Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family.

$38.00 USD

K SMD

Solarbotics L293D Secret Motor Driver

The Secret L293D motor driver kit replaces the guts of a standard servo and turns it into tidy gear motor with a built in motor driver!

$12.95 USD

ARDX

Arduino Experimenters Kit

The Solarbotics edition of the Oomlout Arduino Experimenter's Kit makes learning Arduino microcontrollers fabulously straightforward!

$84.95 USD

60117

Raspberry Pi S.A.F.E. for V3

The Raspberry Pi S.A.F.E. is a useful, simple acrylic enclosure kit designed for your Pi V3.

$6.25 USD

39355

The "Starry Night" Dress Bundle

A complete kit for adding some bling to any wearable project.

$78.56 USD

39365

"Starry Night" Pendant Kit

We've turned our Pendant bundle into a full kit!

$32.35 USD

60116

Raspberry Pi S.A.F.E. (for B+ and V2)

The Raspberry Pi SAFE acrylic kit is an inexpensive and attractive way to protect your B+ / V2

$6.25 USD

KMMB

The Solarbotics Marble Machine Kit - Battery Edition

The fun of a Marble Machine, miniaturized for your desk, now battery powered!

$28.00 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

K SV

Solarbotics Sumovore Mini-Sumo

The Solarbotics Sumovore Kit is a strong, modular design with over 500 man-hours of development and 21 prototypes behind it. It has more power, speed, and is less expensive than the Junun Mark III, Parallax Mini-Sumo, and Tab SumoBot.

$98.50 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

K SV-Atmel

Solarbotics Sumovore Atmel Brainboard V2.0

This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)

$20.95 USD

K SV-PIC

Solarbotics Sumovore PIC Brainboard V2.0

Using one of the most popular styles of microcontrollers, this brainboard add-on replaces the standard discrete-logic brain with an established, powerful microcontroller! For use on select products.

$25.95 USD

K BB-Proto

Solarbotics Brainboard Prototyping PCB

The Brainboard Prototyping board is designed to plug into the expansion ports of the "Version 2" Sumovore Brainboard add-ons.

$4.95 USD

K SV-UPG1

Solarbotics Sumovore Baseplate Upgrade

For owners of Sumovores purchased prior to May 2005, this kit solidifies your Sumovore with a powder-coated steel baseplate!

$6.95 USD

25030

Solarbotics Stamp Stack II Microcontroller Kit

The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.

$35.00 USD

K SS

Solarbotics SolarSpeeder v2.0

The SolarSpeeder 2 Kit is a very quick Solaroller that can cover 3 meters (10 feet) in under 40 seconds in direct sunlight.

$27.50 USD

K PP

Solarbotics Photopopper Photovore V5.0

This new version of the Photopopper is still a solar-powered, light-seeking, obstacle-avoiding robot, but now with updated electronics & gold trim that make it twice as fast!

$35.95 USD

K CMD

Solarbotics L298 Compact Motor Driver Kit

The L298 motor driver IC is a very popular but hard to use chip. Our Compact Motor Driver Kit tames this beast, and adds useful functionality!

$13.95 USD

K SAND

Solarbotics Sandwich PCB & Components

The Sandwich robot is a line-following Robot. Sintra base (not included)

$49.95 USD

Sym1381

Parts Bundle - Symet 1381

These aren't kits, as much as they are an inexpensive bag of components so you can build yourself a Symet.

$13.50 USD

SymFLED

Parts Bundle - Symet FLED

These aren't kits, as much as they are an inexpensive bag of components so you can build yourself a Symet along the lines of the PMK Trimet.

$13.50 USD

K MSE

Solarbotics MSE Solar Engine Kit

For true DIY, hack the included cassette mechanism into a solar-powered device using the high performance Miller Solarengine which converts light into impressive bursts of energy! Rapid fire, SCC2433-MSE version.

$27.50 USD

SCPD

1/8" Square Solar Cell

These are small 1/8" square clear-epoxy encapsulated solar cells generating about 1/2 volt @ 1.9mA in sunlight.

$1.35 USD

SCC2433B-MSE

24 x 33mm Monocrystalline Solar Cell + MSE Circuit

This epoxy-encapsulated monocrystalline solar cell generates a nominal 4.5V / 18mA (sunlight) from a 24x33mm package. And has an integrated solarengine circuit board!

$6.50 USD

SCC3766

37 x 66mm Monocrystalline Solar Cell

This big brother of the SCC3733 is also an epoxy-encapsulated monocrystalline solar cell, but this one offers 8 volts and 44mA in a 37 x 66mm package!

$11.00 USD

TACT2

Dual Small Spring Sensor parts bundle

A pair of low-force omnidirectional tactile sensors

$4.50 USD

SVFP

Sumovore Front Plate

Battle damaged your front plate? Need a new look? Check out these colors!

$5.00 USD

GM4

Gear Motor 4 - Clear Servo

We had Grand-Wing Servo supply us with an inventory of their modified GWS05 servo! It's a servo without pcb - all brawn, no brains!

$12.00 USD

GM4-LG

GM4 Limited-Rotation Output Gear

This output gear changes the GM4 from continuous rotation to limited rotation.

$0.50 USD

GM6

Gear Motor 6 - 120:1 "Baby GM2"

The GM6 is a baby version of our popular GM2 gear motor.

$5.75 USD

GM7

Gear Motor 7 - 120:1 "Baby GM3"

The GM7 is a baby version of our popular right-angle drive GM3 gear motor.

$5.75 USD

GM8

Gear Motor 8 - 143:1 Offset Shaft

This 143:1 gear motor is much like the GM2 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!

$5.75 USD

GM9

Gear Motor 9 - 143:1 90 Degree Shaft

This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!

$5.75 USD

GM17

Gear Motor 17 - 228:1 HE Offset Shaft

A High-Efficiency (HE) 3V DC motor coupled to a 228:1 gearbox give you a very useful low-power gearmotor!

$5.75 USD

GM10

Gear Motor 10 - Geared pager motor

Here by popular demand, and brought to you only from Solarbotics! The pager gear motor is geared 81:1 spins at 233 RPM and draws 13mA (118mA stall) at 3V giving 2.3in*oz.

$9.25 USD

GM11a

56.8:1 Mini Metal Gear Motor

Small, speedy, and all-metal construction!

$15.95 USD

GM12a

100:1 Mini Metal Gear Motor

Just slightly faster than the original Sanyo GM12, and a wee bit less torque - a suitable replacement!

$15.95 USD

GM13a

150:1 Mini Metal Gear Motor

A bit slower than the GM13, but less current consumption. Less expensive, too!

$15.95 USD

GM14a

298:1 Mini Metal Gear Motor

A replacement for the GM14 that has more torque!

$15.95 USD

GM18

30:1 Mini Metal Gear Motor

Want a small, quick precision metal gear motor?

$15.95 USD

RB1

Resistor Bundle Set 1: 100ohm, 470ohm, 1k, 2.2k

10 resistors each of 100ohm, 470ohm, 1k, and 2.2k

$2.20 USD

RB2

Resistor Bundle Set 2: 4.7k, 47k, 100k, 220k

10 resistors each of 4.7k, 47k, 100k, and 220k

$2.20 USD

RB3

Resistor Bundle Set 3: 300k, 360k, 470k, 680k

10 resistors each of 300k, 360k, 470k and 680k

$2.20 USD

RB4

Resistor Bundle Set 4: 1M, 1.5M, 2.2M, 3.6M

10 resistors each of 1M, 1.5M, 2.2M and 3.6M

$2.20 USD

RB5

Resistor Bundle Set 5: 3.9M, 4.3M, 4.7M, 5.1M

10 resistors each of 3.9M, 4.3M, 4.7M, and 5.1M

$2.20 USD

RB6

Resistor Bundle Set 6: 5.6M, 6.2M, 6.8M, 7.5M

10 resistors each of 5.6M, 6.2M, 6.8M and 7.5M

$2.20 USD

RB7

Resistor Bundle Set 7: 7.5M, 8.2M, 9.1M, 10M

10 resistors each of 7.5M, 8.2M, 9.1M and 10M

$2.20 USD

GMW

GM2/3/8/9/17 Gear Motor mounts

Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)

$1.25 USD

RW

Rubber Wheels

10mm Small rubber wheel with 1.5mm shaft hole. Ideal for solarollers!

$1.15 USD

GMPW

GM Series Plastic Wheels

2-5/8" diameter wheels for the GM2/3/8/9 gear motor.

$3.25 USD

JBBW

JBB Walker Bundle

This bundle includes parts for the 2-Motor Walker from Book "Junkbots, Bugbots, and Bots on Wheels"

$47.80 USD

JBBMS

JBB Mini-Sumo Bundle

This bundle includes parts for the Mini-Sumo Wrestling Edgebot from book "Junkbots, Bugbots, and Bots on Wheels"

$32.42 USD

JBBHB

JBB Headbot Bundle

This bundle includes parts for the Bicore Headbot Parts Bundle from Junkbots, Bugbots, and Bots on Wheels

$13.80 USD

JBBHRB

JBB Herbie Bundle

This bundle includes parts for the Herbie Photovore from Junkbots, Bugbots, and Bots on Wheels

$17.60 USD

JBBAB

JBB Adaptive Bicore Bundle

This bundle includes parts for the Adaptive Bicore from the book "Junkbots, Bugbots, and Bots on Wheels"

$6.25 USD

BSCC2433B-MSE-1

SCC2433b-MSE Fast Bundle 1

This bundle lets you configure your SCC243b-MSE for short, quick-pulse operations.

$15.25 USD

BSCC2433B-MSE-2

SCC2433b-MSE Powerful Bundle 2

Need the parts to build up your SCC2433b-MSE? This package lets you assemble the Miller Solarengine in "Power" mode, where it stores up a lot of power, and releases a long burst to the motor.

$18.25 USD

BSCC3733A-MSE-1

SCC3733a-MSE Fast Bundle 1

This bundle lets you configure your SCC3733a-MSE for short, quick-pulse operations.

$16.75 USD

BSCC3733A-MSE-2

SCC3733a-MSE Powerful Bundle 2

Need the parts to build up your SCC3733a-MSE? This package lets you assemble the Miller Solarengine in "Power" mode, where it stores up a lot of power, and releases a long burst to the motor.

$19.75 USD

K MSE-U

Solarbotics Solar Engine Kit

For true DIY, hack the included cassette mechanism into a solar-powered device using the high performance Miller Solarengine which converts light into impressive bursts of energy! High performance, SCC3733-MSE version.

$31.50 USD

GMB28

GM2/GM8 Gear Motor Bracket, Laser-Cut Steel

The GM2/GM8 gear motors have convenient holes for mounting, but these precision stamped-steel brackets add to their versatility!

$1.50 USD

JaD Deal

Just Add 'Duino Bundle

The name is a bit of a misnomer as you might need a little more than an Arduino to make your robot project come alive but this bundle is perfect for starting your newest Robot recipe from scratch!

$40.65 USD

GMB39

GM3/GM9 Gear Motor Bracket, Laser-Cut Steel

The GM3/GM9 gear motors have convenient holes for mounting, but these precision stamped steel brackets add to their versatility!

$1.50 USD

28631

AXE Stack-18 Starter Kit (USB)

Brand new to PICAXE? Here's an all-in-one bundle to get you started with the PICAXE-18X from the ground-level!

$62.82 USD

28621

AXE Stack-28 Starter Kit (USB)

Brand new to PICAXE? Here's an all-in-one bundle to get you started from the ground-level using the PICAXE 28 and a USB Cable interface

$64.62 USD

28570

AXE Stack-18 Kit

This great kit lets you easily program your PICAXE 18M2 IC on a breadboard with many additional features.

$19.95 USD

28580

AXE Stack-28 Kit

The PICAXE is great, but on a breadboard, you'll like it even better. Many handy features make the AXE Stack more useful than just plugging your PICAXE into a breadboard!

$21.95 USD

28920

SB-Freeduino

The Freeduino is based on the open source project version of the Arduino Diecimila. We've adapted the design for more convenience as a semi-kit!

$26.00 USD

GM20

100:1 Mini Metal Sealed Gear Motor

The 100:1 Mini Metal Gear Motor is about 25% more motor than our GM12a (in speed, torque, and power consumption), but has an enclosed gearbox!

$19.75 USD

GM21

360:1 Mini Metal Sealed Gear Motor

This long-motored 360:1 Mini Metal Gear Motor is a torquey, compact brute!

$19.75 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!