Here's a really cool quadrature encoder and motor driver for the GM17 Gear motor designed by the micro-specialists at Didel.
Use the NunChucky I2C Breakout Board Adapter to use your Wii Nunchuck controller in your own projects!
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor.
The PING))) Ultrasonic Range Finder is a simple to use ultrasonic ranging system that can be easily interface to any microcontroller.
The Parallax TSL1401 Linescan Imaging Daughterboard provides one-dimensional sight to almost any microcontroller.
Looking for DS1620+ Serial Digital Thermometer ? The DS1620 Serial Digital Thermometer is a 9-bit serial thermometer with fail safe alarm. Order your DS1620 Serial Digital Thermometer online now !
The DS18B20+ is a handy, 1-wire compatible temperature sensor, ideal for interfacing with the PICAXE!
The Sensirion Temp/Humidity Sensor is an efficient sensor that measure the ambient temperature and humidity of the surrounding area.
The MEAS Vibration sensor is flexible and durable.
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. COOL! Add it to your clothes - ideal for interfacing with LilyPad Arduino!
The IESF-R-5 Pressure Sensor is a variable resistance sensor where the output resistance is proportional to the force applied to the bulb.
The Phidget 8/8/8 Interface Kit uses the USB interface to connect 8 analog inputs, 8 digital inputs and 8 digital outputs to your Phidgets sensor network.
The Parallax ColorPAL is a miniature color and light sensor which uses an RGB LED to detect and generate light for color sensing.
When the QTI sensor is over a dark surface, the reflectivity is very low; when the QTI is over a light surface, the reflectivity is very high and will cause a different reading from the sensor.
Need a tight and tidy way to measure 6-degrees of freedom? The SparkFun IMU Digital Combo Board, measures pitch, roll, yaw, and rate of acceleration on each axis in a very flat package!
This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel 1 mOhm shunt resistors, then converted to a final analog voltage output by the TI INA-169.
The Phidgets Sensor Cable 350 is used for the analog input on the Phidget Interface Kit 8/8/8.
The Phidget Mini-Dual Axis Joystick is a dual axis mini joystick with momentary contact switch.
This clever "spring-in-loop" sensor configuration is a well-proven touch-sensor for small to medium size robot applications
This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna!
The 1066_1 PhidgetAdvancedServo 1-Motor allows you to control the position, velocity, and acceleration of one RC servo motor.
The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD.
The Phidget Vibration Sensor is a piezo deflection sensor for the Phidget 8/8/8.
The Phidget Rotation Sensor is a 300 deg. Rotation sensor for the Phidget 8/8/8.
The Phidget Interface Kit 0/0/4 is a simple usb device that allows you to control 4 relays via PC Software.
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled.
The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors.
The Phidget Slider 60 Sensor is a 60mm slide sensor that works with the Phidgets 8/8/8.