This board is a simple carrier for Allegro’s ±5A ACS714 Hall effect-based linear current sensor. This version accepts a bidirectional current input with a magnitude up to 5
This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel 1 mOhm shunt resistors, then converted to a final analog voltage output by the TI INA-169.
This ratiometric linear Hall-effect sensor provides a voltage output that is proportional to the applied magnetic field.
This great little 30 Amp sensor works great on both AC and DC currents.
This kit contains a 125 KHz RFID reader and additional parts.
The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness to hook them up!
The Phidgets Sensor Cable 350 is used for the analog input on the Phidget Interface Kit 8/8/8.
The Phidget Mini-Dual Axis Joystick is a dual axis mini joystick with momentary contact switch.
This little gadget does a great job of letting you sharing files with your computer utilizing simple serial commands.