Prototyping


Show: Items

Sort By:


304 Products Found


20928

ProtoBoard-3U, 6-hole Strips, 1 sided, 100x160mm

This traditional soldering protoboard is very similar to a solderless breadboard, but also accommodates a 96-pin VME backplane connector for slotting connectivity.

$10.78 USD

20934

StripBoard-3U, 160x100mm Solder Protoboard

Stripboard make for fast prototyping for simple circuits.

$10.78 USD

20914

PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard Size1

A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects!

$3.75 USD

20916

PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard

For the ultimate in protoboard flexibility, here's a one-pad-per-hole, plated-through, double-sided board from BPS.

$6.82 USD

20922

ProtoBoard2H-1, 2-hole Strips, 1 sided, 50x80mm

Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.

$3.11 USD

20930

StripBoard-1, 80x50mm Solder Protoboard

Medium size stripboard protoboard, featuring full-width solder points.

$3.11 USD

20936

SMTpads-Size1, 80x50mm, 50x50mil Pad SMT Protoboard

This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a ground plane.

$3.75 USD

20938

SMTpads-Size2, 100x80mm, 50x50mil Pad SMT Protoboard

This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with ground plane.

$6.82 USD

20940

SMTpads-Size2, 100x80mm, 50x50mil Pads,SMT Solder Protoboard

This 50mil-pad breakout is best for SMD components on 50mil or 100mil pitch spacing, with a duplicate set of pads on the other side (no ground plane).

$6.82 USD

20944

SMTpads-Size1, 80x50mm, 100x100mil Pad SMT Protoboard

This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a duplicate pad arrangement on the backside.

$3.75 USD

20946

SMTpads-Size2, 100x80mm, 100x100mil Pad SMT Solder Protobrd

This 100mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a ground plane on the other side.

$6.82 USD

20948

SMTpads-Size3U, 100x100mil Pads

SMT parts are pretty common. This massive 3U size solder protoboard features 100x100mil pads on a large 160x100mm surface. Has ground plane on other side.

$12.99 USD

20950

SMTpads-Size1, 80x50mm, 200x100mil Pads, SMT Solder protobrd

For REALLY large SMD devices, the 200x100mil pads on this smaller protoboard will make construction much easier. Has ground plane on other side.

$3.75 USD

20952

SMTpads-Size2, 100x80mm, 200x100mil Pads, Solder Protoboard

For REALLY large SMD devices, the 200x100mil pads on this protoboard will make construction much easier. Has ground plane on other side.

$6.82 USD

45037

Premium Jumper Wires Male/Female - 30cm (10-pack)

They're like little 30cm (12") high-quality extension cables for your breadboard. Actually, they ARE little 30cm high-quality extension cables for your breadboard!

$4.50 USD

17444

DC Barrel Jack Adapter - Breadboard Compatible

Power that breadboard simply with this DC barrel jack.

$0.95 USD

FPin10L-413

10-pin Shield Stacking Header

Want to stack more than one shield at a time? Use these instead of standard 10-pin headers to add extra functionality to your shield!

$0.50 USD

M2.5x00-N

M2.5 Metric Hex Nut, Package of 10

M2.5 Hex Nuts, package of 10.

$2.00 USD

M2.5x8mm-PPH

Metric Pan-head M2.5 x 8mm long Bolt, Package of 10

M2.5 x 8mm Metric pan-head bolt, Package of 10

$2.00 USD

M2.5x00-W

Metric 2.5mm Washer, Package of 10

Metric M2.5 Washer, Package of 10

$2.00 USD

M2x00-W

M2 Metric Washer, Package of 10

M2 Metric Washer, Package of 10

$2.00 USD

M2x00-N

Metric 2mm Hex Nut, 10 Lot

Metric M2 Steel Hex Nut, Package of 10

$2.00 USD

M2x08mm-PPH

M2 x 8mm Metric Pan-head Bolt, Package of 10

Small metric hardware: M2 x 8MM pan-head bolts, Package of 10

$2.75 USD

17415

USB A Female DIP 90

These type 'A' female USB connectors are the standard when it comes to connecting peripherals to your project.

$1.25 USD

FPin6RA

Female Socket strip - 6 per (Right Angle)

Right Angle Female Socket Strip - 6 per Strip, gold flash surface, 0.1" spacing

$0.35 USD

52627

OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack

T-shaped joining plates for all your OpenBeam creations!

$5.20 USD

52632

OpenBeam L Joining Plate, Anodized Aluminum - 2 Pack

L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles.

$5.20 USD

52822

PCBGrip Tri Nut Accessory (pairs)

Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem.

$4.60 USD

52824

T-Bolt Accessory (pairs)

Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch!

$4.00 USD

52820

PCBGrip Cylinder Accessory (4 pack)

This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!).

$6.00 USD

52828

PCBGrip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack)

Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip.

$13.25 USD

52826

PCBGrip M3x0.5 Thumb Screw, 14mm dia. Head (4 pack)

These are nicely machined M3, 14mm diameter thumbscrew from PCBGrip.

$5.25 USD

52830

PCBGrip M3x0.5 Knurled Nut (25 pack)

Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3.

$9.85 USD

4-40x0.5S

#4-40x1/2in Yellow Zinc Standoff, M/M, 1/4in threaded ends

#4-40 x 1/2" yellow zinc coated (chromate) steel standoff.

$0.50 USD

BattAAA

AAA Battery

Plain and simple AAA battery

$1.50 USD

52718

Kossel Carbon Fiber Arm Set

A 6-pack of 3.5mm carbon fiber rods, 262mm long

$17.00 USD

52706

Kossel 250mm diameter Borosilicate Build Plate

Designed for the Kossel 3D printer, this 250mm borosilicate plate is the preferred platform for 3D printing.

$7.35 USD

BattLR44

Maxell LR44 A76 Alkaline Battery

LR44 Alkaline Battery

$0.95 USD

TBLK6-100

6 Position Terminal Block 0.1" (0.254mm) Spacing

It's a SMALL terminal block, designed to mount in standard 0.1" (0.254mm) spaced holes. Ideal for permanent yet serviceable connections to microcontrollers.

$3.00 USD

TBLK8-100

8 Position Terminal Block 0.1" (2.54mm) spacing

It's a SMALL terminal block, designed to mount in standard 0.1" (0.254mm) spaced holes. Ideal for permanent yet serviceable connections to microcontrollers.

$3.10 USD

TBLK10-100

10 Position Terminal Block 0.1" (0.254mm) Spacing

It's a SMALL terminal block, designed to mount in standard 0.1" (0.254mm) spaced holes. Ideal for permanent yet serviceable connections to microcontrollers.

$3.20 USD

BHoldAAA-2cell-Enc

2 x AAA Battery Holder with Cover and Switch

For those of you building smaller devices, you may appreciate a holder for a pair of AAA batteries.

$1.50 USD

29144

GrovePi+

GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi.

$29.99 USD

fpin4-90

Edge Connector - 4 position 90 degree

4 Position long strip, right angle female connector with 0.1" spaced centers.

$0.50 USD

FPin5

Female Socket Strip - 5 per

Female Socket Strip - 5 per Strip, gold flash surface, 0.1" spacing

$0.23 USD

FPin8

Female Socket Strip - 8 per

Female socket strip - 8 per Strip, 0.100" (2.54mm) spacing

$0.23 USD

FPin10

Female Socket Strip - 10 per

Female socket strip - 10 per Strip, 0.100" (2.54mm) spacing

$0.23 USD

FPin11

Female Socket Strip - 11 per

Female socket strip - 11 per Strip, 0.100" (2.54mm) spacing

$0.23 USD

FPin14

Female Socket Strip - 14 per

Female Socket Strip - 14 per Strip, gold flash surface, 0.1" spacing

$0.23 USD

MPin12RA

Male Strip Pins - 12 per (Right Angle)

Male Strip - 12 per Strip, gold flash surface on 0.1" spacing. These are bent over at 90 degrees for edge-wise connections.

$0.23 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!