Prototyping


Show: Items

Sort By:


299 Products Found


DC-8 Pin

8 Pin DIP Socket Carrier

The idea of a DIP socket is to allow easy insertion/replacement of chips in existing circuits.

$0.25 USD

DC-14 Pin

14 Pin DIP Socket Carrier

14 Pin DIP Socket, good for use with the 74AC14, 74HCT4066, LM324 and other similar foot-print ICs.

$0.30 USD

DC-16 Pin

16 Pin DIP Socket Carrier

16 Pin DIP Socket Carrier - great for piece-of-mind with sensitive IC installations!

$0.30 USD

DC-20 Pin

20 Pin DIP Socket Carrier

20 pin DIP carriers are great for free-form 74xx240/245 circuit layouts.

$0.35 USD

DC-28 Pin

28 Pin DIP Socket Carrier

28 pin DIP carrier for the ATmega8L or other 28 pin DIP devices.

$0.50 USD

DC-40W Pin

0.600" wide 40 Pin DIP Socket Carrier

A chip carrier for the 16F877A or other 40 pin DIP device.

$0.75 USD

SPin30

30 Pin SIP Sockets

These strip headers are snappable, so you can 'snik' off exactly how many you need.

$2.50 USD

DC-24W Pin

24 Pin Wide DIP Socket Carrier

24 pins on 0.6" spacing - ideal for BS2 mounting!

$0.50 USD

SIN2mm-W

2mm White Sintra

This 2mm thick 8x12" expanded PVC sheet has excellent robot-building characteristics.

$2.85 USD

SIN3mm

3mm Sintra

This 8x12" 3mm thick expanded PVC sheet is available in multiple colors, and is excellent for building robot frames and shells

$3.25 USD

SIN6mm

6mm Sintra

This 8x12 inch, 6mm thick expanded PVC sheet has excellent robot-building characteristics.

$5.75 USD

BattR4

3.6V / 170mA Pyramid Rechargeable Battery

This 3.6V 170mAh rechargeable Ni-Cad battery contains three cells in pyramid configuration.

$0.50 USD

PP12-100

Push Pogo Pin - Cone Tip

This 33mm (1.3") long cone tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!

$1.25 USD

PP2-50

50-Series Push Pogo Pin - 4-Sided Point

This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!

$1.50 USD

PP2-75

75-Series Push Pogo Pin - 4 Point

This medium 17mm long 4-sided point tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!

$1.25 USD

PPH-50

50-Series Push Pogo Probe Holder

This little devices allow you to simply and easily install and replace existing 50-series pogo pins

$1.50 USD

Fpin4

Female Strip Socket - 4 per strip

Female Socket Strip - 4 per Strip, gold flash surface, 0.1" spacing

$0.50 USD

18835

Adafruit FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards

This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board.

$14.95 USD

34010

Adapter, 6VDC @ 500mA

This is a general purpose unregulated power adapter that converts 120VAC@60 Hz (North American) to 6V DC at 500mA.

$9.95 USD

34020

Breadboard Voltage Regulator Kit

The BVR Breadboard regulator kit makes it easy to add regulated, switchable power to your breadboard by using practically any 2.1mm DC adapter!

$5.95 USD

21010

Economy Jumper Wiring Kit

The Economy Jumper Wiring Kit has 140 pieces of pre-bent wire for prototyping on solderless breadboards.

$4.95 USD

DC-18 Pin

18-Pin DIP Socket Carrier

The idea of a DIP socket is to allow easy insertion/replacement of chips in existing circuits.

$0.25 USD

17010

Battery Holder 3-AA

This battery holder uses 3 AA cells to power your electronics, robotic or embedded project. You can do without, but MAN, when you need to hold 3AA cells, you'll need it!

$1.95 USD

17020

3-AA Battery Holder (w/ 15cm leads)

This unit is great for wiring up 3 AA batteries in series.

$2.25 USD

52613

OpenBeam Extrusion 360mm Length

This is the 'beam' part of 'Open Beam', the central building component for the system.

$4.25 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!