It's a SMALL terminal block, designed to mount in standard 0.1" (0.254mm) spaced holes. Ideal for permanent yet serviceable connections to microcontrollers.
They're like little 15cm (6") high-quality extension cables for your breadboard. Actually, they ARE little 15cm high-quality extension cables for your breadboard!
They're like little 30cm (11.8") high-quality extension cables for your breadboard. Actually, they ARE little 30cm high-quality extension cables for your breadboard!
Here is a perfect power supply shield for those projects that can use a wall wart!
These are the same as the 3 pin LiPo Battery connectors
These are the same as the 2 pin LiPo Battery connectors
These are the same as the 6 pin LiPo Battery connectors
These are the same as the 4 pin LiPo Battery connectors
These are the same as the 5 pin LiPo Battery connectors
Molex 2510 3-pin 0.1" pitch female connector with leads
Molex 2510 4-pin 0.1" pitch female connector with leads
830 contact single panel breadboard with 3 banana terminal jacks
This metric bolt matches the threads on the face of the GM11a, GM12a, GM13a, and GM14a gear motors, making mechanical installations easier. Sold individually.
Ideal for making pin-to-pin connections. These are the products you need. Way better than soldering tiny sockets to wires and heat-shrinking them yourself!
This breadboard is high quality and features nickel plated contacts in order to insure very low clip resistance and durability in order to insure that the board will work for years to come.
Breadboards are a quick and easy way to prototype electronic circuits.
This 3-Panel Breadboard is a great prototyping tool that offers a large workspace.
Look! It's a 17x10 Mini Breadboard! Works great for prototyping, and not-so-great for cutting bread.
This 70-piece flexible wire jumper kit is sure to replace your old-style solid-wire jumpers. These are more flexible, robust, and easy to use!
Male Strip - 6 per Strip, gold flash surface on 0.1" spacing
Male Strip - 6 per Strip, gold flash surface on 0.1" spacing. These are bent over at 90 degrees for edge-wise connections.
A prototyping area that comes with headers you can solder on for easy connection to any WeMos D1 Mini project.
Double up the possibilities of your WeMos D1 Mini projects with this dual base shield.
Add regulated 5V or 3.3V power to your breadboard using either a 2.1MM barrel jack or USB cable.
A breadboard friendly breakout board for the ESP-01. No longer do you need to work with that annoying dual row header!
Forgot Your Password?
Don't Have an Account?Sign Up!