The Phidget 8/8/8 Interface Kit uses the USB interface to connect 8 analog inputs, 8 digital inputs and 8 digital outputs to your Phidgets sensor network.
Looking for a HighSpeed Encoder Cable ? Get your HighSpeed Encoder Cable online now!
The Phidgets Sensor Cable 350 is used for the analog input on the Phidget Interface Kit 8/8/8.
The Phidget Mini-Dual Axis Joystick is a dual axis mini joystick with momentary contact switch.
The 1066_1 PhidgetAdvancedServo 1-Motor allows you to control the position, velocity, and acceleration of one RC servo motor.
The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD.
The Phidget Rotation Sensor is a 300 deg. Rotation sensor for the Phidget 8/8/8.
The Phidget Interface Kit 0/0/4 is a simple usb device that allows you to control 4 relays via PC Software.
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled.
The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors.
The Phidget Slider 60 Sensor is a 60mm slide sensor that works with the Phidgets 8/8/8.
12VDC, 2 Amp, power supply with center positive polarity for general project use.