Accessories


Show: Items

Sort By:


55 Products Found


M4x5mmG

Metric M4 x 5mm long Grub/Set Screw

Don't you hate it when you lose the set screw? Here are replacements!

$0.30 USD

M3x5mmG

Metric M3 x 5mm long Grub/Set Screw

Don't you hate it when you lose the set screw? Here are replacements!

$0.25 USD

14445

GT2 Timing Belt, sold by meter

This belt may not hold your pants up, but it works great with pulleys and pinions! Sold by the meter up to 10M in length! If you want a 5M length, order 5.

$6.00 USD

14400

16T GT2 5mm bore Timing Pulley

16 Tooth 5mm Bore Pinion Pulleys for stepper motors, GT2

$5.95 USD

14480

608ZZ Double-Shielded Bearing, 8x22x7mm

For Bearings Sake! Let it slide!

$0.80 USD

14485

693ZZ double-shielded bearing, 3x8x4mm

Friction Be Gone! These bearings will let you slide!

$1.00 USD

14490

MF83ZZ Flanged double-shielded bearing, 3x8x3mm

For Flanges Sake! Let it slide!

$1.00 USD

14410

20T GT2 5mm bore Timing Pulley

20 Tooth 5mm Bore Pinion Pulleys for stepper motors, GT2.

$7.95 USD

14415

36T GT2 5mm bore Timing Pulley

36 Tooth 5mm Bore Pinion Pulleys for stepper motors, GT2

$8.95 USD

14405

20T GT2 8mm bore Timing Pulley

20 Tooth 8mm Bore Pinion Pulley.

$7.95 USD

14430

GT2 Idle Pulley Tensioner Wheel Bore 4mm - no teeth

4mm dia. Idler Pulley Tension Wheel for GT2

$4.50 USD

14435

GT2 Aluminum Timing Idler with bearings - no teeth

Idler bearing (no teeth), matches 20 tooth pulley diameter.

$2.88 USD

HS11x11x5

Aluminum 11x11x5mm Heat Sink

Got a stepper driver running a bit too hot? Vreg going into thermal shutdown? Here's a heatsink, for small applications.

$0.75 USD

M1.7x035

GM11a/12a/13a/14a Mounting Screw/Bolt

This metric bolt matches the threads on the face of the GM11a, GM12a, GM13a, and GM14a gear motors, making mechanical installations easier. Sold individually.

$0.20 USD

51082

Pololu Mini Plastic Gearmotor bracket Pair - Wide

Affix our GM6 and GM7 motors to any project with these plastic motor brackets.

$3.25 USD

51084

Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors

A right angle bracket used to mount a NEMA 17 stepper motor.

$2.95 USD

51083

Pololu Mini Plastic Gearmotor bracket Pair - Tall

Affix our GM6 and GM7 motors to any project with these plastic motor brackets.

$3.25 USD

K SV-UPG1

Solarbotics Sumovore Baseplate Upgrade

For owners of Sumovores purchased prior to May 2005, this kit solidifies your Sumovore with a powder-coated steel baseplate!

$6.95 USD

LMP1

Leg Mounting Pads

Looking for a way to attach legs to a servo? Here you go - these Leg Mounting Pads are ideal for that purpose.

$1.00 USD

LMP2

Leg Mounting Pads - Heavy Duty

Much like the lighter duty LMP1, these are a way to attach a solderable mount point to a servo arm or GMW wheel. Now Gold plated!

$1.00 USD

MMFC

Fuse Clip Motor Mounts

1/4" Fuse clip motor mount, great for holding the standard Pager motor

$0.25 USD

GRF

Gumby Rubber Feet

These rubber booties fit perfectly over the gumby leg wire to combine good grip with great aesthetics.

$0.25 USD

WLeg

Wire Gumby Legs

Called "Gumby Legs" because this 3 foot length of 10-gauge solid copper wire is strong, yet reformable into different shapes.

$3.00 USD

GM4-LG

GM4 Limited-Rotation Output Gear

This output gear changes the GM4 from continuous rotation to limited rotation.

$0.50 USD

HexW050

0.050" Bondhus Hex Wrench

This is a quality 0.050" allen-key style hex wrench, ideal for tightening hex socket set screws like the ones used in our RW2 wheels.

$0.50 USD

GMB28

GM2/GM8 Gear Motor Bracket, Laser-Cut Steel

The GM2/GM8 gear motors have convenient holes for mounting, but these precision stamped-steel brackets add to their versatility!

$1.50 USD

GMB39

GM3/GM9 Gear Motor Bracket, Laser-Cut Steel

The GM3/GM9 gear motors have convenient holes for mounting, but these precision stamped steel brackets add to their versatility!

$1.50 USD

51060

Pololu Mini Gearmotor Bracket

The GM series of mini gearmotors are very cool, but sometimes faceplate mounting isn't good enough. Welcome the gearmotor brackets by Pololu!

$4.95 USD

51070

Pololu Mini Metal EXTENDED Gearmotor Bracket

The GM series of mini gearmotors are very cool, but sometimes faceplate mounting isn't good enough. Welcome the gearmotor brackets by Pololu!

$4.95 USD

Prop3030

3.2" Propeller

Looking for a way to move air? Mount one of these on a DC motor, and blow some air!

$0.65 USD

Prop2508

2.55" Propeller

Looking for a small, well-made propeller for your projects? GWS makes a great series of propellers, and the EP2508 is a nice size for a pager motor!

$0.95 USD

51510

Didel GM17 Encoder

Here's a really cool quadrature encoder and motor driver for the GM17 Gear motor designed by the micro-specialists at Didel.

$11.95 USD

51600

0.61mm 9-Tooth Pinion

Didel Module 0.3 Gears - 9 Teeth pinion, 0.61mm bore (4mm short pagers)

$1.69 USD

51610

0.97mm 12-Tooth Pinion

Didel Module 0.3 Gears - 12-tooth pinion, 0.97mm bore for 1mm shaft

$1.65 USD

51615

36/12-Tooth Spur

Didel Module 0.3 Gears - 36/12-tooth spur, 0.69mm ID

$3.63 USD

51620

48/12-Tooth Spur

Didel Module 0.3 Gears - 48/12-tooth spur, 0.76mm bore

$5.83 USD

51630

81/12-Tooth Spur

Didel Module 0.3 Gears - 81/12-tooth spur, 0.78mm ID

$9.24 USD

51635

8mm Worm Gear

Didel Module 0.3 Gears - Worm gear, 3mm diameter, 8mm long

$6.38 USD

51500

51:1 and 104:1 Rome Gears for GM17

This package includes two sets of gears so that you can modify your GM17 to a 51:1 or 104:1 ratio.

$4.40 USD

51602

0.71mm 9-Tooth Pinion

Didel Module 0.3 Gears - 9 tooth pinion, 0.71mm bore for 4mm pagers. Measures 3.55 x 3.20 x 3.20mm

$1.49 USD

51603

0.81mm 9-Tooth .Pinion

Didel Module 0.3 Gears - 9-tooth pinion, 0.81mm bore, for 6mm and several 7 mm pagers. Measures 4.47 x 3.14 x 3.14mm.

$1.49 USD

51607

0.78mm 12-Tooth Pinion

Didel Module 0.3 Gears - 12-tooth pinion, 0.78mm bore, measures 3.50 x 4.00 x 4.00mm.

$1.40 USD

51609

0.82mm 12-Tooth Pinion

12 tooth pinion, 0.82mm bore for 6mm pagers. Measures 3.46 x 3.96 x 3.96mm.

$1.35 USD

51645

GM23 Motor Brackets & 32mm Wheels

The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor.

$14.56 USD

40391

Pan & Tilt Bracket Kit

This bracket, combined with a servo, is great for mounting a variety of sensors or devices that require basic mobility.

$8.99 USD

m1.6x4-p

Metric M1.6mm x 4mm screw, Pan-head Package of 10

Metric M1.6 x 4mm long screw, 0.35mm pitch, Phillips pan-head, 10-lot

$4.00 USD

M1.4x10-P

M1.4 x 10mm Long Screw (5mm partial thread), 10 lot

Metric M1.4 x 10mm long, 0.3 pitch screw - partial thread. Package of 10.

$1.00 USD

22091

Solarbotics Pico Linear Servo Voltage Adapter Kit (5V to 3.6V)

Like some electronics, this linear motion Pico servo doesn't like running at over 5V. Even slightly less is better. This adapter board adds a bit of voltage drop to a 5/6V system to make your servo happy.

$1.00 USD

51090

A4988 Stepper Motor Driver

The Allegro A4988 stepper motor driver carrier by Pololu is an excellent, compact stepper motor driver used in many DIY projects, particularly 3D printers.

$6.49 USD

51075

15.5D mm Metal Gearmotor Bracket

Long have we waited for an efficient way to mount micro metal gearmotors to our projects, that day has finally arrived! The 15.5D mm Metal Gearmotor Bracket has come to save the day, who needs Superman...

$4.95 USD

50859

Actobotics Standard Gripper Kit A - Channel Mount

Sometimes you need to pinch (or grip) something remotely, and this Actobotics unit the solid and inexpensive mechanical part to your solution.

$9.95 USD

50861

Parallel Gripper Kit A - Channel Mount

Actobotics Large Servo-driven Claw

$14.95 USD

51086

Bracket Pair for Sharp Distance Sensors - Parallel

Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Parallel

$3.49 USD

51088

Bracket Pair for Sharp Distance Sensors - Multi-option

Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Multi-Option

$3.95 USD

25505

Fan module with speed control

Simple, logic-controlled variable speed fan for fire-fighterbots and other wind-inducing experimentation (beans not required)

$7.15 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!