Motors & Servos


Show: Items

Sort By:


156 Products Found


RW70x08

Pololu 70x8mm Black Wheel Pair

These black plastic wheels press fit onto the 3mm D shafts of our mini and micro metal gearmotors to make a nice drive solution for small robots.

$8.55 USD

RW80x10

Pololu 80x10mm Black Wheel Pair

These black plastic wheels press fit onto the 3mm D shafts of our mini and micro metal gearmotors to make a nice drive solution for small robots.

$9.25 USD

RW90x10

Pololu 90x10mm Black Wheel Pair

These black plastic wheels press fit onto the 3mm D shafts of our mini and micro metal gearmotors to make a nice drive solution for small robots.

$9.95 USD

22007

Track and Wheel Set

Allowing for a large degree of adjustability and creativity in design, the Track and Wheel Set offers three different lengths of tracks to choose from.

$9.50 USD

22170

Servo - Medium

A simple, low-cost, high quality servo for all your mechatronic needs.

$10.95 USD

19000

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

It's a clever breakout board for a chip that talks I2C to drive 16 channels of PWM / Servos.

$14.95 USD

19010

16-Channel 12-bit PWM/Servo Shield - I2C interface

It's an independent 16-channel, 12-bit PWM chip breakout that's ideal for driving LEDs or servos over an I2C network. Pretty handy for "Set-it & forget-it" installations.

$17.50 USD

50115

Sabertooth Dual 12A Motor Driver

The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market.

$69.99 USD

m1.6x4-p

Metric M1.6mm x 4mm screw, Pan-head Package of 10

Metric M1.6 x 4mm long screw, 0.35mm pitch, Phillips pan-head, 10-lot

$4.00 USD

50858

Rover 5 Robot Platform

If you're looking for a base for your next robot, look no further than the Rover 5. This 4 motor monstrosity takes any terrain by storm.... just don't take it out in a storm... please!

$59.95 USD

45050

Vacuum Pump - 12V

This air pump really blows! This pump operates at 12V and has enough power for most small projects.

$14.95 USD

GM15A

Gear Motor

You know and love the GM15, but hate the pulley shaft? Ok, ok - here's a more standard "D" shaft configuration!

$19.00 USD

M1.4x10-P

M1.4 x 10mm Long Screw (5mm partial thread), 10 lot

Metric M1.4 x 10mm long, 0.3 pitch screw - partial thread. Package of 10.

$1.00 USD

22085

VS-9 Pico Servo

The VS-9 Pico Servo is a strong little servo motor for it's size, it's like that little kid that the neighbourhood bully used to pick on that ended up giving the bully a black eye!

$9.85 USD

22090

VS-19 Pico Linear Servo

The VS-19 Pico Linear Servo is a tiny linear actuator with 2cm of travel. The uses for this linear motor are endless, we'll leave it to you to find a killer application for it.

$9.85 USD

GM25

120:1 Micro Pager Planetary Gearmotor

This is the tiniest gear motor we've seen that's humanly affordable. What can you do with it? Ummm...

$14.50 USD

GM23

Gear Motor 23 - 1:192 Offset Shaft

This 1:192 Tiny Geared Pager Motor has an offset shaft much like the GM2, but is roughly half the size in every dimension. We suspect that these were the motors used for the Magic school bus in it's miniature state.

$5.00 USD

GM24

Gear Motor 24 - 1:192 90 Degree Shaft

Call it a teeny, tiny little brother to the GM3 gearbox. With a suitably smaller appetite for power!

$4.25 USD

22055

4 Wheels & Motor Upgrade Kit

This surplus wheel set comes with one motor, two sets of wheels (two standard, two wide plastic studded tires and plastic hubs) and four guide rollers.

$2.00 USD

23220

Pololu Dual VNH5019 Motor Driver Shield for Arduino

Pololu is known for some killer motor driver technology. They're bringing their mojo to the Arduino! Dual robust VNH5019 motor drivers take 5.5 to 24 V and punch out a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels.

$52.95 USD

51090

A4988 Stepper Motor Driver

The Allegro A4988 stepper motor driver carrier by Pololu is an excellent, compact stepper motor driver used in many DIY projects, particularly 3D printers.

$6.49 USD

32010

Motor Mind BE 3A Serial Motor Controller

Here is a motor controller that only needs 2 lines for control, it communicates serially via 2400 or 9600 Baud TTL signals. It's a smart controller that has a number of parameters that can be adjusted and can return valuable data such as speed & position.

$29.99 USD

51075

15.5D mm Metal Gearmotor Bracket

Long have we waited for an efficient way to mount micro metal gearmotors to our projects, that day has finally arrived! The 15.5D mm Metal Gearmotor Bracket has come to save the day, who needs Superman...

$4.95 USD

33606

35STH40 NEMA-14 Bipolar 40mm Stepper - Dual Shaft

This motor is about half as small as our NEMA-17 Stepper and as a result only needs about half the power. Compared to the other NEMA-14 stepper we carry, it's a little longer but has the option to mount an encoder to the rear shaft!

$16.00 USD

RM4A

RF500TB-14415 DC Motor

The RF500TB is a very efficient, powerful, slow pancake motor.

$4.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!